HP dc5750 manual Enww

Page 37

10.Connect the power cable (1) and data cable (2) to the rear of the optical drive.

Figure 2-23Connecting the Power and Data Cables

CAUTION Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A sharp bend can break the internal wires.

11.Connect the other end of the SATA data cable to the white system board connector labeled SATA1.

12.Replace the access panel.

13.If the computer was on a stand, replace the stand.

14.Reconnect the power cord and any external devices, then turn on the computer.

15.Lock any security devices that were disengaged when the access panel was removed.

The system automatically recognizes the drive and reconfigures the computer.

ENWW

Installing and Removing Drives 31

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Hardware Reference Guide dc5750 Small Form Factor Model Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Standard Configuration Features Product FeaturesFront Panel Components Drive configuration may vary by model2Rear Panel Components Rear Panel Components3Keyboard Components KeyboardUsing the Windows Logo Key Serial Number Location Special Mouse FunctionsServiceability Features Hardware UpgradesUsing the Small Form Factor Computer in a Tower Orientation Using the Small Form Factor Computer in a Tower Orientation 2Removing the Computer Access Panel Hardware Upgrades Removing the Computer Access Panel3Replacing the Computer Access Panel Replacing the Computer Access PanelRemoving the Front Bezel 4Removing the Front Bezel Hardware Upgrades5Removing a Bezel Blank Replace the front bezel Removing Bezel BlanksReplacing the Front Bezel 6Replacing the Front Bezel Hardware UpgradesDIMMs Installing Additional MemoryDDR2-SDRAM DIMMs Description Socket Color Populating Dimm SocketsInstalling DIMMs 9Rotating Optical Drive Retainer Up Hardware Upgrades Enww Description Removing or Installing an Expansion Card12Removing the Expansion Slot Retainer 13Removing an Expansion Slot Cover Hardware Upgrades 15Removing a PCI Express x16 Expansion Card 16Installing an Expansion Card Hardware Upgrades Replace the slot cover retainer 18Drive Positions Drive PositionsInstalling and Removing Drives Removing an Optical Drive 20Removing the Optical Drive 22Installing the Optical Drive Hardware Upgrades Enww Removing a Diskette Drive 24Disconnecting the Diskette Drive Cables Hardware Upgrades26Removing the Diskette Drive Enww 29Installing a Diskette Drive Enww Enww 32Disengaging the Diskette Drive Hardware Upgrades 34Disconnecting the Hard Drive Power Cable and Data Cable Enww Enww Enww Power Supply 115V 230V SpecificationsRated Input Current maximum1 Battery Replacement Type Figure B-2Removing and Replacing a Coin Cell Battery Type Enww External Security Devices Installing a Security LockCable Lock Padlock Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Appendix D Electrostatic Discharge Computer Operating Guidelines and Routine Care Cleaning Optical Drive PrecautionsSafety Shipping PreparationIndex Enww
Related manuals
Manual 52 pages 58.36 Kb Manual 72 pages 24 Kb
Top Page Image Contents