HP dc5750 manual Type

Page 52

5.If the computer is on a stand, remove the computer from the stand.

6.Remove the access panel.

7.Locate the battery and battery holder on the system board.

NOTE On some computer models, it may be necessary to remove an internal component to gain access to the battery.

8.Depending on the type of battery holder on the system board, complete the following instructions to replace the battery.

Type 1

a. Lift the battery out of its holder.

Figure B-1Removing a Coin Cell Battery (Type 1)

b.Slide the replacement battery into position, positive side up. The battery holder automatically secures the battery in the proper position.

Type 2

a.To release the battery from its holder, squeeze the metal clamp that extends above one edge of the battery. When the battery pops up, lift it out (1).

46 Appendix B Battery Replacement

ENWW

Image 52

Contents Hardware Reference Guide dc5750 Small Form Factor Model Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Product Features Standard Configuration FeaturesDrive configuration may vary by model Front Panel ComponentsRear Panel Components 2Rear Panel ComponentsKeyboard 3Keyboard ComponentsUsing the Windows Logo Key Special Mouse Functions Serial Number LocationHardware Upgrades Serviceability FeaturesUsing the Small Form Factor Computer in a Tower Orientation Using the Small Form Factor Computer in a Tower Orientation Removing the Computer Access Panel 2Removing the Computer Access Panel Hardware UpgradesReplacing the Computer Access Panel 3Replacing the Computer Access Panel4Removing the Front Bezel Hardware Upgrades Removing the Front BezelRemoving Bezel Blanks 5Removing a Bezel Blank Replace the front bezel6Replacing the Front Bezel Hardware Upgrades Replacing the Front BezelDIMMs Installing Additional MemoryDDR2-SDRAM DIMMs Populating Dimm Sockets Description Socket ColorInstalling DIMMs 9Rotating Optical Drive Retainer Up Hardware Upgrades Enww Removing or Installing an Expansion Card Description12Removing the Expansion Slot Retainer 13Removing an Expansion Slot Cover Hardware Upgrades 15Removing a PCI Express x16 Expansion Card 16Installing an Expansion Card Hardware Upgrades Replace the slot cover retainer Drive Positions 18Drive PositionsInstalling and Removing Drives Removing an Optical Drive 20Removing the Optical Drive 22Installing the Optical Drive Hardware Upgrades Enww 24Disconnecting the Diskette Drive Cables Hardware Upgrades Removing a Diskette Drive26Removing the Diskette Drive Enww 29Installing a Diskette Drive Enww Enww 32Disengaging the Diskette Drive Hardware Upgrades 34Disconnecting the Hard Drive Power Cable and Data Cable Enww Enww Enww Specifications Power Supply 115V 230VRated Input Current maximum1 Battery Replacement Type Figure B-2Removing and Replacing a Coin Cell Battery Type Enww External Security Devices Installing a Security LockCable Lock Padlock Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Appendix D Electrostatic Discharge Computer Operating Guidelines and Routine Care Optical Drive Precautions CleaningSafety Shipping PreparationIndex Enww

Related manuals

Manual 52 pages 58.36 Kb

Manual 72 pages 24 Kb