HP 8200 tower manual Upgrading, Monitor Connectors

Page 71

Integrated Graphics Subsystem

6.3Upgrading

These systems provide direct, dual-monitor support; a VGA monitor and a DisplayPort monitor can be connected and driven simultaneously. These systems also include a PCIe x16 graphics connector that specifically supports a PCIe x16 graphics card and a PCIe x16 connector that provides PCIe x4 operation for an x4 or x16 PCIe card.

The upgrade procedure is as follows:

1.Shut down the system through the operating system.

2.Unplug the power cord from the rear of the system unit.

3.Remove the chassis cover.

4.Install the graphics card into the PCIe x16 graphics slot or the PCIe x4/x16 slot.

5.Replace the chassis cover.

6.Reconnect the power cord to the system unit.

7.Power up the system unit:

✎If a PCIe graphics card is installed in the PCIe x4 /x16 slot, the integrated graphics controller of the processor will be disabled by default, but can be re-enabled through the BIOS settings to allow an alternate method of multi-monitor operation. Press the F10 key during the boot process to enter the ROM-based Setup utility and re-enable the GMA for multi-monitor operation. A PCIe card installed in the PCIe x4 slot will be limited to x4 operation.

✎Two PCIe graphics can be installed simultaneously to provide an alternate method for multi-monitor support. In this configuration, the integrated graphics controller (if present) will be disabled.

✎The MXM interface and integrated graphics controller share the same VGA and DP output connectors. If an MXM solution is used in the USDT model, the integrated graphics controller cannot be enabled.

6.4Monitor Connectors

All form factors provide an analog VGA connector and a DisplayPort connector, and can drive both types of monitors simultaneously. The following subsections describe these connectors.

Technical Reference Guide

www.hp.com

6-5

Page 70 Page 72
Image 71
Page 70 Page 72
Contents March Technical Reference GuideTechnical Reference Guide Contents Input/Output Interfaces Processor/Memory SubsystemSystem Support Integrated Graphics Subsystem Power and Signal DistributionIndex Error Messages and CodesOnline Viewing Hardcopy IntroductionAbout this Guide Additional Information SourcesValues Serial NumberNotational Conventions Special NoticesAcronym or Abbreviation Description Common Acronyms and AbbreviationsAcronyms and Abbreviations CGA Eide IRQ Nvram SDR Uart Introduction Introduction System OverviewHP Uefi Bios FeaturesUsdt SFF CMT Feature Differences by Form FactorFunction System ArchitectureArchitectural Differences by Form Factor HP Compaq 8200 Elite Business PC Architecture, Block diagram Chipset Intel Processor SupportComponent Name Function Support ComponentsSystem Memory Support Component FunctionsNetwork Interface Controller Mass Storage AccommodationsLegacy Input/Output Interfaces Universal Serial Bus InterfaceHP ProtectTools Embedded Security Graphics SubsystemAudio Subsystem Parameter Operating Non-operating SpecificationsEnvironmental Specifications Factory Configuration Power Supply Electrical SpecificationsSFF CMT Physical SpecificationsParameter System Overview Processor/Memory Subsystem Architecture Processor/Memory SubsystemIntel Processor Intel Processor FeaturesSpecifications of Supported Intel Processors Processor Changing/Upgrading Memory Subsystem Channel B Channel a Socket Total Memory UpgradingMemory Mapping and Pre-allocation Memory Socket LoadingSystem Memory Map for maximum of 8 gigabytes PCI 2.3 Bus Operation System SupportPCI Bus Overview Transaction Protocol Layer PCI Request/Grant SignalsPCI Express Bus Operation Software/Driver LayerLink Layer PCI Power Management SupportOption ROM Mapping PCI InterruptsPCI 2.3 Bus Connector Pinout PCI ConnectorsPCI 2.3 Connector PCIe Bus Connector Pinout PCIe ConnectorsMode Apic ModeSystem Resources InterruptsPCI Interrupt Distribution Direct Memory AccessSystem Board System Interrupts Pirq Connector Clearing Cmos Real-Time Clock and Configuration MemorySecurity Functions Configuration Memory Cmos MapSystem Management Standard Cmos LocationsInterface Security Power-On / Setup PasswordSetup Password Cable Lock ProvisionAcpi Wake-Up Event System Wakes From Power ManagementSmart Cover Lock Optional Acpi Wake-Up EventsSystem Operational Status LED Indications System Status PowerLED Beeps Action RequiredSystem Status System I/O Map Register Map and Miscellaneous FunctionsThermal Sensing and Cooling Port Function System I/O MapSIO Controller Functions Gpio FunctionsPCH-DO Functions System Support Input/Output Interfaces Pin Description Pin Sata Connector PinoutSATA/eSATA Interfaces Sata interfaceESATA interface Optional eSATA Bracket/Cable AssemblySerial Interface DB-9 Serial Connector PinoutPin Signal Description Parallel Interface Support Standard Parallel Port ModeEnhanced Parallel Port Mode Extended Capabilities Port ModePin Signal Function Parallel Interface ConnectorDB-25 Parallel Connector Pinout Keyboard Interface Operation Keyboard/Pointing Device InterfacePointing Device Interface Operation Keyboard/Pointing Device Interface ConnectorsKeyboard/Pointing Device Connector Pinout PCH USB Port Mapping USB Signals USB Connector Location see note belowUniversal Serial Bus Interface USB Cable Length Data USB ConnectorUSB Connector Pinout USB Cable DataPCH-D0 Audio SubsystemAudio Multistreaming HD Audio ControllerHD Audio Link Bus Parameter Measurement Audio SpecificationsHD Audio Subsystem Specifications Function Activity LED Speed LED Network Interface Controller10. LAN LED Indications Wake-On-LAN Support Power Management SupportNIC Connector Parameter Compatibility standard orprotocol NIC Specifications11. NIC Specifications Functional Description Integrated Graphics SubsystemSupported Intel Processor IGC Specifications IGC Memory Allocation with Windows Vista or Windows System Memory Installed Pre-allocatedIGC Memory Allocation with Windows XP Maximum Refresh Rate IGC Supported ResolutionsResolution Analog Digital DisplayPort Upgrading Monitor ConnectorsPin Signal Analog Monitor ConnectorDisplayPort Connector DB-15 Monitor Connector PinoutPower Distribution Power and Signal DistributionParameter Watt supply Usdt Power DistributionUsdt Power Supply Specifications Power Supply Unit 4 3 2 2 SFF/MT/CMT Power DistributionMT/CMT 320-Watt Power Supply Unit Specifications SFF 240-Watt Power Supply Unit SpecificationsPressed Power Button Results Power ControlPower Button Power Button ActionsPower LED Condition Power LED IndicationsWake Up Events Power ManagementConsumption To S0 by Required System Power StatesPower Transition OS Restart State System ConditionDesignator Component function Signal DistributionSystem Board Connector, Indicator, and Switch Designations SW1 Shows pinouts of headers used on the system boards Power and Signal Distribution System Bios Changeable Splash Screen ROM FlashingUpgrading Network Boot F12 Support Boot FunctionsBoot Device Order Boot Error Codes Memory Detection and ConfigurationVisual power LED Audible speaker Meaning Boot Error CodesClient Management Functions INT15 Function ModeClient Management Functions System ID and ROM Type Smbios SupportTemperature Status USB Legacy SupportManagement Engine Functions Beeps Power LED Probable Cause Error Messages and CodesBeep/Power LED Codes Table A-1. Beep/Power LED CodesProcessing is complete Power-On Self Test Post MessagesDirectory. Do not power down system until Board For systems with 2 Sata ports Root directory. Do not power down system until Table A-3 System Error Messages Probable Cause System Error MessagesMessage Probable Cause Memory Error MessagesMemory Error Messages Table A-4Table A-5 Keyboard Error Messages Probable Cause Keyboard Error MessagesTable A-7 Video Graphics Error Messages Probable Cause Printer Error MessagesVideo Graphics Error Messages Table A-6 Printer Error Messages Probable CauseTable A-8 Diskette Drive Error Messages Probable Cause Diskette Drive Error MessagesTable A-9 Serial Interface Error Messages Probable Cause Serial Interface Error MessagesModem Communications Error Messages Table A-11 System Status Error MessagesSystem Status Error Messages Table A-12 Hard Drive Error Messages Probable Cause Hard Drive Error MessagesXx = 03, Hard drive read/write compare test Table A-13 Hard Drive Error Messages Probable Cause Table A-15 Audio Error Messages Probable Cause Audio Error MessagesTable A-14 Video Graphics Error Messages Probable Cause Table A-17 Network Interface Error Messages Probable Cause 17 DVD/CD-ROM Error MessagesNetwork Interface Error Messages DVD/CD-ROM Error MessagesTable A-18 Scsi Interface Error Messages Scsi Interface Error Messages 65xx-xx, 66xx-xxPointing Device Interface Error Messages 8601-xx Numerics IndexIndex
Related manuals
Manual 6 pages 24 Kb Manual 29 pages 22.5 Kb Manual 13 pages 15.59 Kb

8200 tower specifications

The HP 8200 Tower is a robust desktop computer designed for professional environments, delivering performance and expandability for a variety of business needs. This workstation is part of HP's Elite series, known for its reliability and advanced technologies, making it a sound choice for companies requiring consistent operation.

One of the defining features of the HP 8200 Tower is its versatile processing power, powered by the Intel Core i5 and i7 processors. These processors offer a multi-core architecture, ensuring that users can efficiently handle multitasking and processor-intensive applications. With options for up to 32GB of DDR3 RAM, the HP 8200 Tower can smoothly run multiple applications simultaneously, making it suitable for tasks ranging from everyday office work to more demanding software like graphical design programs.

The system also provides a range of storage options, including traditional hard disk drives and faster solid-state drives, allowing users to select the balance of capacity and speed that best suits their needs. Additionally, the HP 8200 supports RAID configurations, enhancing data redundancy and performance, thereby protecting critical business data.

In terms of expandability, the HP 8200 Tower offers multiple PCIe slots for adding graphic cards, sound cards, or other expansion cards. This capability makes it adaptable for various purposes, whether that involves improving graphics performance for video editing or integrating specialized hardware for specific business functions.

The design of the HP 8200 Tower ensures efficient cooling and quiet operation. It features a tool-less chassis, allowing for easy upgrades and maintenance. The internal layout maximizes airflow, keeping components cool even under heavy workloads, an important feature for maintaining long-lasting performance.

Connectivity options are plentiful, with USB 2.0 and USB 3.0 ports, enabling speedy data transfer and peripheral connectivity. Additionally, integrated Gigabit Ethernet offers reliable networking capabilities, essential for seamless communication within a business environment.

The HP 8200 Tower showcases HP's commitment to sustainability, featuring energy-efficient components and a design aimed at reducing environmental impact. Overall, this powerful workstation combines performance, expandability, and energy efficiency, making it an excellent choice for any professional setting. With its blend of modern technologies and traditional reliability, the HP 8200 Tower stands out as a dependable tool for businesses looking to enhance productivity.
Top Page Image Contents