Replacing the computer access panel

1.Place the panel on the computer (1), and then slide it forward (2).

2.Fasten the two screws (3) to secure the panel in place.

Changing from desktop to tower configuration

The computer can be used in either a horizontal or a tower orientation.

1.Remove/disengage any security devices that prohibit opening the computer.

2.Remove all removable media, such as optical discs or USB flash drives, from the computer.

3.Turn off the computer properly through the operating system, then turn off any external devices.

4.Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer.

5.Position the computer so that its left side is down and the optical disc drive is up. Set the computer down on the left side.

The right side, with the optical disc drive, should be uppermost.

Replacing the computer access panel