HP D3H66UTABA manual 1Product information, Topic Location, Select Workstations, HP Cool Tools

Product information

Table 1-1Product information

Topic	Location
Technical specifications	Go to www.hp.com/go/quickspecs. In the left pane, select your region and then
	select Workstations.
HP Cool Tools (Windows® 7	Most HP workstations with the Windows 7 operating system are preloaded with tools
only)	that may enhance system performance and with additional software that is not
	automatically installed during first boot. To access these applications:
	● Click the HP Cool Tools icon on the desktop, or
	● Open the HP Cool Tools folder by selecting Start > All Programs > HP >
	HP Cool Tools.
	To learn more about these applications, click HP Cool Tools—Learn More.
	To install or launch the applications, click the appropriate application icon.
Regulatory information	Refer to the Safety & Regulatory Information guide for product regulatory information.
	You can also refer to the regulatory label on the workstation chassis.
Accessories	For complete and current information on supported accessories and components, see
	http://www.hp.com/go/workstations.
System board	A diagram of the system board is located on the inside of the chassis (all-in-one
	configuration). Additional information is located in the workstation Maintenance and
	Service Guide on the Web at http://www.hp.com/support/workstation_manuals/.
Serial number, Certificate of	The serial number label is on a pull-out card on the side of the display (all-in-one
Authenticity (COA), and Genuine	configuration). The COA (Windows 7) and GML (Windows 8) are typically located
Microsoft Label (GML) (if	near the serial number label. Some workstations have this label on the bottom panel.
applicable)
Linux	For information on running Linux on HP workstations, go to http://www.hp.com/
	linux/, then select Linux on Workstations from the list on the left.

2 Chapter 1 Locating HP resources