EPA Energy Star Compliance
Monitors that are marked with the Energy Star® Logo meet the requirements of the EPA Energy Star program. As an Energy Star Partner,
Power Cord Set Requirements
The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between
The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country where you purchased the equipment.
If you need to obtain a power cord for a different country, you should purchase a power cord that is approved for use in that country.
The power cord must be rated for the product and for the voltage and current marked on the product’s electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the
0.75mm² or 18AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you have questions about the type of power cord to use, contact your HP authorized service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it
or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product.
English
User’s Guide 15
Filename: mb416033.doc | Title: User's Guide - CRT Color Monitor Series FS7600, vx74 [English] | |||
Template: Print_2004.dot | Author: WASSER Studios | Last Saved By: Kim Toy | ||
Revision #: 22 | Page: 15 of 20 | Printed: 06/03/04 10:15 AM |