York BHP024 General Description, Unit Cabinet, Indoor Supply FAN Assembly, Outdoor FAN Assembly

Page 26

MECHANICAL SPECIFICATIONS

GENERAL DESCRIPTION

Units shall be factory-assembled, single packaged, Heat Pumps, designed for outdoor mounted installa- tion. Units shall have minimum SEER ratings of 13.0. They shall have built in, equal size, field convertible duct connections for down discharge supply/return or horizontal discharge supply/return.

The units shall be factory wired, piped, charged with R- 22 refrigerant and factory tested prior to shipment. All unit wiring shall be both numbered and color coded.

All units shall be manufactured in a facility certified to ISO 9001 standards, and the cooling performance shall be rated in accordance with DOE and ARI test proce- dures. Units shall be classified to UL 1995/CAN/CSA No. 236-M90 conditions.

UNIT CABINET

1.Unit cabinet shall be constructed of G90 galva- nized steel, with exterior surfaces coated with a non-chalking, powered paint finish, certified at 1000 hours salt spray test per ASTM-B117 stan- dards.

2.The unit top shall be a single piece “Water Shed” design, with drip edges and no-seam corners to provide optimum water integrity.

3.Unit shall have a rigidly mounted condenser coil guard to provide protection from objects and per- sonnel after installation.

4.Indoor blower section shall be insulated with up to 3/4” thick, aluminum, foil faced insulation, fastened to prevent insulation from entering the air stream.

5.Cabinet panels shall be “large” size, easily remov- able for servicing and maintenance, with built-in lift handles.

6.Unit shall be built on a formed, “Super-Structure” design base pan, with embossments at critical points to add strength, rigidity and aid in minimizing sound.

7.Full perimeter base rails shall be provided to assure reliable transit of equipment, overhead rig- ging, fork truck access and proper sealing on roof curb applications. Base rails shall be removable, when required, to lower unit height.

036-21528-007-A-1205

8.Filters shall be furnished and be accessible through a removable access door, sealed air tight. (Single phase models - accessory kit available. Three phase models - standard from factory.)

9.Units vertical discharge and return duct configura- tion shall be designed to fit between standard 24” O.C. beams without modification to building struc- ture, duct work and base unit.

10.Condensate pan shall be internally sloped and conform to ASHRAE 62-89 self-draining standards, with 3/4" NPTI copper, ridged mount connection.

INDOOR (SUPPLY) FAN ASSEMBLY

1.Fan shall be direct drive, constant CFM, ECM design. Job site selected (BHP) brake horse power shall not exceed the motors nameplate horse power rating.

2.Fan wheel shall be double-inlet type with forward- curved blades, dynamically balanced to operate smoothly throughout the entire range of operation. Airflow design shall be constant air volume.

3.Bearings shall be sealed and permanently lubri- cated for longer life and no maintenance.

4.Fan assembly shall be “Slip Track” (slide-out) design for easy removal and cleaning.

OUTDOOR FAN ASSEMBLY

1.The outdoor fan shall be of the direct-driven propel- ler type, discharge air vertically, have aluminum blades riveted to corrosion resistant steel spider bracket and shall be statically balanced for smooth operation.

2.The outdoor fan motor shall be totally enclosed with permanently lubricated bearings and internally protected against overload conditions.

REFRIGERANT COMPONENTS

1.Compressors:

A.Shall be fully hermetic type, direct drive, internally protected with internal high-pressure relief and over temperature protection. The hermetic motor shall be suction gas cooled and have a voltage range of + or - 10% of the unit nameplate voltage.

26

Unitary Products Group

Page 25 Page 27
Image 26
Page 25 Page 27
Contents On Site Flexibility Lower Installation CostOperating Efficiency Utility Connections Made EasyDurable Finish Condensate PANCondensate Drain Full Perimeter Base RailsEasy Service Access LOW MaintenanceSecured Service Access Ports Replacement PartsRoof Curbs Table of ContentsRectangle to Round Adapters Manual Outdoor DamperHSPF1 RATING2 MBH Seer EER COP Single Phase Three PhasePhysical Data Nominal Capacity KWOutdoor Coil Temperature of AIR on Indoor Coil Temperature AIR onCooling Capacities 2 TON BHP024 Cooling Capacities 2-1/2 TON BHP030 Cooling Capacities 3 TON BHP036 Outdoor Coil WB FCooling Capacities 3-1/2 TON BHP042 Cooling Capacities 4 TON BHP048 Cooling Capacities 5 TON BHP060 Heating Capacities 2-1/2 TON BHP030 CFM Return CAP1 Outdoor AIR TEMPERATURE, F 72% RH AIR FHeating Capacities 2 TON BHP024 Heating Capacities 3 TON BHP036 Heating Capacities 3-1/2 TON BHP042Heating Capacities 4 TON BHP048 Heating Capacities 5 TON BHP060Model no Motor Speed Unit External Static Pressure IWG Setting Airflow WattsAdditional Static Resistance RESISTANCE, IWGField Wiring Diagram BHP Electric Data Basic UnitMCA RLA LRA FLARLA LRA Electrical Data 13 Seer Heat Pump / Electric HeatHACR2 Model BHP Operating Corner Weights Unit SizeApplication Data B1HPUnit Dimensions Typical Applications Roof Curb Dimensions Typical Wiring Diagram 208/230-1-60 Power Supply Typical Wiring Diagram 230-3-60 Power Supply Typical Wiring Diagram 460/575-3-60 Power Supply General Description Indoor Supply FAN AssemblyOutdoor FAN Assembly Unit CabinetElectrical Requirements Unit Operating CharacteristicsElectric Heating Section 036-21528-007-A-1205
Related manuals
Manual 28 pages 47.21 Kb

BHP024 specifications

The York BHP024 is a robust and efficient air conditioning unit designed to meet the needs of residential and commercial spaces. As part of the York BHP series, this model is tailored for environments requiring reliable cooling solutions, ensuring occupant comfort across varied climate conditions.

One of the standout features of the York BHP024 is its high-efficiency rating. The unit employs advanced cooling technology that allows it to deliver exceptional performance while consuming less energy, making it an environmentally-friendly choice. With a seasonal energy efficiency ratio (SEER) that exceeds industry standards, the BHP024 not only helps in reducing electricity bills but also contributes to lower greenhouse gas emissions.

The unit is equipped with a variable speed compressor that intelligently adjusts its operation based on the cooling demand. This not only enhances comfort by maintaining consistent temperatures but also minimizes energy wastage. The compressor, paired with a high-efficiency evaporator coil, optimizes heat exchange processes, further improving overall performance.

In terms of build quality, the York BHP024 features a durable cabinet constructed from corrosion-resistant materials, ensuring longevity even in challenging weather conditions. The unit’s design includes sound-dampening technologies, resulting in quieter operation, which is particularly important for residential applications.

Another notable characteristic of this model is its user-friendly control interface. The BHP024 comes with a programmable thermostat, enabling users to customize their cooling preferences and schedule operations according to their lifestyles. This smart control capability aligns with modern energy management practices, making it easier for users to optimize comfort and efficiency.

Installation versatility is also a key benefit of the York BHP024. The unit can be configured in various setups, accommodating different indoor layouts and requirements. This flexibility ensures that customers can find a suitable installation method that works for their space.

In conclusion, the York BHP024 is a cutting-edge air conditioning solution characterized by efficiency, durability, and user-friendly technology. Its advanced features make it a top choice for those seeking reliable and effective cooling solutions, whether for residential or light commercial applications. With its combination of high performance and robust construction, the BHP024 stands out as an ideal option for anyone looking to enhance their indoor climate control.
Top Page Image Contents