HP L5009TM Recognizing Preset Display Resolutions, Entering User Modes, HP L5006tm and L5009tm

Recognizing Preset Display Resolutions

The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognized these preset modes and they will appear properly sized and centered on the screen.

HP L5006tm and L5009tm

Table B-5Factory Preset Modes

Preset	Pixel Format	Horz Freq (kHz)	Band Width (MHz)
1	VGA 640 x 350 70Hz	31.5	28.322
2	VGA 720 x 400 70Hz	31.47	28.322
3	VGA 640 x 480 60Hz	31.47	25.175
4	MAC 640 x 480 66Hz	35.00	32.24
5	VESA 640 x 480 72Hz	37.86	31.5
6	VESA 640 X 480 75Hz	37.50	31.5
7	VESA 800 X 600 56Hz	35.16	36
8	VESA 800 X 600 60Hz	37.88	40
9	VESA 800 X 600 75Hz	46.88	49.5
10	VESA 800 x 600 72Hz	48.08	50
11	MAC 832 x 624 75Hz	49.72	57.283
12	VESA 1024 x 768 65Hz	48.36	65
13	SUN 1024 x 768 65Hz	52.45	70.49
14	VESA 1024 x 768 70Hz	56.48	75
15	VESA 1024 x 768 75Hz	60.02	78.75

Entering User Modes

The video controller signal may occasionally call for a mode that is not preset if:

●You are not using a standard graphics adapter.

●You are not using a preset mode.

If this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. Your changes can be made to any or all of these modes and saved in memory. The monitor automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In addition to the 15 factory preset, there are 7 user modes that can be entered and stored.

The only condition to store as a user mode is the new display information must have 1 KHz difference for horizontal frequency or 1 Hz for vertical frequency or the sync signal polarities are different from the default modes.

ENWW Recognizing Preset Display Resolutions 25