|
|
|
| Troubleshooting | |
|
|
|
|
|
|
| Problems |
|
|
|
|
|
| Possible solutions | |||
|
|
|
|
|
|
| Power LED doesn't light up. |
| • Check if the power switch is in the ON position | ||
|
|
|
| • Make sure the power cord is properly connected | |
|
|
|
| ||
| No screen image |
| • Check if the power switch is in the ON position | ||
|
|
|
| • Make sure the power cord is properly connected | |
|
|
|
| • Make sure the signal cable is securely connected | |
|
|
|
| • When the display is in use, it will automatically turn off to enter | |
|
|
|
| the power saving mode. Please press any key to see if the | |
|
|
|
| image resumes. | |
| Abnormal colors are present |
| • Please refer to the "Color Temperature" section to adjust the | ||
|
|
|
| RGB color or select a color temperature. | |
| The image bounces or a wave |
| • Remove any electrical device that may be causing electrical | ||
| pattern is present |
| interference. | ||
|
|
|
| • Check the signal cable and make sure the pins are not bent. | |
|
|
|
| ||
| The screen image is not |
| • Press the Auto button to automatically optimize the display | ||
| centered or the size is incorrect |
| status. | ||
|
|
|
| • Refer to the "Image Control section". | |
|
|
|
|
|
|
Note: Never disassemble or repair the product yourself. If your problem cannot be solved according to the troubleshooting guidelines, please contact your local dealer.
13