HP 2310TI manual Dvi

Table 4-3OSD Menu (continued)

Icon	Main Menu	Submenu	Description
		Sleep Timer	Provides the timer adjustment menu options:
			● Set Current Time—sets the current time in
			hours and minutes
			● Set Sleep Time—sets the time you want to
			place the monitor in sleep mode
			● Set on Time—sets the time you want the
			monitor to wake up from sleep mode
			● Timer—sets the Sleep Timer feature On or Off.
			The default setting is Off.
			● Sleep Now—immediately sets the monitor to
			enter sleep mode
	Language		Selects the language in which the OSD menu is
			displayed. The factory default is English.
	Information		Selects and displays important information about the
			monitor.
		Current Settings	Provides the current input video mode.
		Recommended	Provides the recommended resolution mode and
		Settings	refresh rate for the monitor.
		Serial Number	Reports the serial number of the monitor. The serial
			number is needed if contacting HP technical support.
		FW Version	Reports the firmware version of the monitor.
		Backlight Hours	Reports the total hours of backlight operation.
		Service Support	http://www.hp.com/support
	Factory Reset		Returns all OSD menu settings and DDC/CI controls
			to the factory default settings, except the Language.
	Source Control		Selects the video input signal. DVI is the factory
			default.
		DVI	Selects DVI as the video input signal.
		HDMI (2310t models	Selects HDMI as the video input signal.
		only)
		VGA (2310ti models	Selects VGA as the video input signal.
		only)
		Default Source	Selects the default or primary video input signal
			when the monitor is connected to two active and
			valid video sources. The monitor will automatically
			determine the video format. The choices are:
			● DVI
			● HDMI (2310t models only)
			● VGA (2310ti models only)
			The factory default is DVI.

ENWW Adjusting the Monitor Settings 25