HP 2310TI manual Optimizing Digital Conversion

Table 4-3OSD Menu (continued)

Icon	Main Menu	Submenu	Description
		Auto-Switch Source	Turns the system's automatic video signal input to
			On or Off. The factory default is On.
	Exit		Exits the OSD menu screen.

Optimizing Digital Conversion

Two controls in the on-screen display can be adjusted to improve image performance: Clock and Clock Phase.

NOTE: The Clock and Clock Phase controls are adjustable only when using an analog input. These controls are not adjustable for digital inputs.

The Clock must first be set correctly since the Clock Phase settings are dependent on the main Clock setting. Use these controls only when the auto-adjustment function does not provide a satisfactory image.

●Clock—Increases/decreases the value to minimize any vertical bars or stripes visible on the screen background.

●Clock Phase—Increases/decreases the value to minimize video distortion or video jitter.

NOTE: When using the controls, you will obtain the best results by using the auto-adjustment pattern software utility provided on the CD.

When adjusting the Clock and Clock Phase values, if the monitor images become distorted, continue adjusting the values until the distortion disappears. To restore the factory settings, select Yes from the Factory Reset menu in the on-screen display.

26 Chapter 4 Operating the Monitor ENWW