QuickSpecs
HP ProLiant ML330 Generation 6
Memory
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the slower DIMM is on the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be 1066MHz If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels, the maximum speed will be 1066MHz
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels, you run at 1066MHz
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz
Maximum memory speed will also depend on the processor installed. References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to
DIMM slot and configuration diagrams
Basic memory slot & population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
18 DIMM SLOTS (9 per CPU node)
|
| CPU1 |
| CPU2 |
| ||
| slot # |
| population order | slot # |
| population order |
|
Chnl 0 | 1 |
| G | 1 |
| G | Chnl 0 |
| 2 |
| D | 2 |
| D |
|
| 3 |
| A | 3 |
| A |
|
|
|
|
|
|
|
|
|
Chnl 1 | 4 |
| H | 4 |
| H | Chnl 1 |
| 5 |
| E | 5 |
| E |
|
| 6 |
| B | 6 |
| B |
|
|
|
|
|
|
|
|
|
Chnl 2 | 7 |
| I | 7 |
| I | Chnl 2 |
| 8 |
| F | 8 |
| F |
|
| 9 |
| C | 9 |
| C |
|
Standard memory configuration (1 CPU model)
4GB, consisting of three (2) 2GB
|
| CPU1 |
| CPU2 |
| ||
| slot # |
| population order | slot # |
| population order |
|
Chnl 1 | 1 |
| G; empty | 1 |
| G; empty | Chnl 1 |
| 2 |
| D; empty | 2 |
| D; empty |
|
| 3 |
| A; 2GB DIMM | 3 |
| A; empty |
|
|
|
|
|
|
|
|
|
Chnl 2 | 4 |
| H; empty | 4 |
| H; empty | Chnl 2 |
| 5 |
| E; empty | 5 |
| E; empty |
|
| 6 |
| B; 2GB DIMM | 6 |
| B; empty |
|
|
|
|
|
|
|
|
|
Chnl 3 | 7 |
| I; empty | 7 |
| I; empty | Chnl 3 |
| 8 |
| F; empty | 8 |
| F; empty |
|
| 9 |
| C; empty | 9 |
| C; empty |
|
DA - 13361 Worldwide QuickSpecs — Version 17 — | Page 31 |