QuickSpecs
HP ProLiant ML330 Generation 6
Core Options
HP Power Supplies | NOTE: It is highly recommended that you use the HP Power Advisor in defining |
|
| the |
|
| at: |
|
| CAUTION: Optional Power Supplies used for Redundancy "must" match the |
|
| original supplied power supply. Upgrades for more power headroom, when |
|
| replacing the original power supplies must match if purchased for redundancy. |
|
| Option Kits contain optional power supply, an IEC power cable and PDU IEC |
|
| cables. In ProLiant Servers that have more than one power slot (bay), only same |
|
| size power supplies are recommended. If |
|
| inserted you will get errors and operation will fail. |
|
| HP 750W CS HE Power Supply | |
| NOTE: The HP 750W power supply requires purchasing the Redundant Power |
|
| Supply Enablement Kit (P/N |
|
| HP Redundant Power Supply Enablement Kit | |
| NOTE: The Redundant Power Supply Enablement kit does not integrate any |
|
| power supply. To enable full Redundancy, it requires 2 units of 750W Power |
|
| supply. |
|
|
|
|
HP Cooling Options | HP 5U G6 Redundant fan kit | |
| NOTE: Option Kits contain optional power supply, an IEC power cable and PDU |
|
| IEC cables. |
|
DA - 13361 Worldwide QuickSpecs — Version 17 — | Page 22 |