HP ML330 manual Technical Specifications

QuickSpecs

HP ProLiant ML330 Generation 6

Technical Specifications

System Unit	Tower Dimensions	7.87 x 16.81 x 24.13 in (200 x 427 x 613 mm)
	(H x W x D)
	(W/O foot stand)
	Tower Weight	Maximum:	30 kg
	(approximate)	(All hard drives, power
		supplies and processors
		installed)
		Minimum:	16 Kg
		(One hard drive, power
		supply and processor
		installed)
	Input Requirements	Rated Line Voltage	100 to 240 VAC
	(per power supply)	Rated Input Current	7.1 Amps (at 120VAC) to 3.5 Amps (at 240
			VAC)
		Rated Input Frequency	50 to 60 Hz
		Rated Input Power	852 W
	BTU Rating	Maximum	460W - 1773 BTU / hr (at 120 VAC), 1715 (at
			240 VAC)
			750W - 2892 BTU / hr (at 120 VAC), 2797 (at
			240 VAC)
			1200W - 3530 BTU / hr (at 120 VAC), 4600
			(at 240 VAC)
	Power Specifications	To review typical system power ratings use the Power Calculator which
		is available via the online tool located at URL: www.hp.com/go/proliant-
		energy-efficientor www.hp.com/go/hppoweradvisor
		- Click on the system of interest. Example: ML330 G6
		- Follow the instructions of the next screens.
	Power Supply Output	Rated Steady-State	460 (750) W (at 100 VAC),
	(per power supply)	Power	460 (750) W (at 200 VAC)
		Maximum Peak Power	460 (750) W (at 100 VAC),
			460 (750) W (at 200 VAC)
			NOTE: See Power Supply Specifications
			tables for complete details on 460W PSU and
			optional 750W.
	System Inlet	Operating	50° to 95° F (10° to 35° C) at sea level with an
	Temperature		altitude derating of 1.8°F per 1,000 ft (1.0° C
			per every 305 m) above seal level to a
			maximum of 10,000 ft (3050 m) no direct
			sustained sunlight . Maximum rate of change
			is 18°F/hr (10°C/hr). The upper limit may be
			limited by the type and number of options
			installed. System performance may be
			reduced if operating with a fan fault or above
			86°F (30°C).
		Non-Operating	-22° to 140° F (-30° to 60° C)
	Relative Humidity	Operating	10% to 90% relative humidity (Rh), 82.4°F
	(non-condensing)		(28°C) maximum wet bulb temperature, non-
			condensing.
		Non-operating**	10% to 95% relative humidity (Rh), 101.7°F
			(38.7°C) maximum wet bulb temperature,
			non-condensing.

DA - 13361 Worldwide QuickSpecs — Version 17 — 3-31-2010 Page 41