HP DL160 manual Technical Specifications

QuickSpecs

HP ProLiant DL160 Generation 5

Technical Specifications

System Unit	Dimensions (H x W x D) 1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm)
	(with bezel)
	Weight	Maximum	37.00 lb (16.78 kg)
	(approximate)	(all hard drives, power
		supplies, and processors
		installed)
		Minimum	30.00 lb (13.69 kg)
		(one hard drive, power
		supply, and processor
		installed)
	Input Requirements	Rated Line Voltage	90 to 140 VAC
	(per power supply)		180 to 264 VAC
		Rated Input Current	7.31A at 115VAC
			3.6A at 230VAC
		Rated Input Frequency	47 to 63 Hz
		Rated Input Power	855W (at 100 VAC),
			840.72W (at 200 VAC)
	Power Specifications	To review typical system power ratings use the Power Calculator which
		is available via the online tool located at URL:
		http://h30099.www3.hp.com/configurator/calc/Power%
		20Calculator%20Catalog.xls
		- Click on the system of interest. Example: DL160 G5
		- Follow the instructions of the next screens.
	Power Supply Output	Rated Steady-State	653.10W (at 100 VAC),
	(per power supply)	Power	653.08W (at 200 VAC)
	System Inlet	Operating	50° to 95° F (10° to 35° C) at sea level with an
	Temperature		altitude derating of 1.8°F per every 1000 ft
			(1.0°C per every 305 m) above sea level to a
			maximum of 10,000 ft (3050 m), no direct
			sustained sunlight. Maximum rate of change
			is 18°F/hr (10°C/hr). The upper limit may be
			limited by the type and number of options
			installed.
			System performance may be reduced if
			operating with a fan fault or above 86°F
			(30°C).
		Non-operating	40° to 140° F (-40° to 60° C)
			Maximum rate of change is 36°F/hr (20°C/hr).
	Relative Humidity	Operating	10% to 85% relative humidity (Rh), 82.4°F
	(non-condensing)		(28°C) maximum wet bulb temperature, non-
			condensing.
		Non-operating	10% to 95% relative humidity (Rh), 101.7°F
			(38.7°C) maximum wet bulb temperature,
			non-condensing.
	Altitude	Operating	10,000 ft (3050 m). This value may be limited
			by the type and number of options installed.
			Maximum allowable altitude change rate is
			1500 ft/min (457 m/min).

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 Page 37