QuickSpecs
HP ProLiant DL160 Generation 5
Standard Features
Network Controller Two embedded NC105i PCIe Gigabit Server Adapters
Expansion Slots # | Technology | Bus Width | Connector | Bus | Device No.** Form Factor | Notes | |
|
|
| Width* | Number* |
|
|
|
1 | x16 | x16 | 1 | 0 | Full length, | 3.3 volts | |
2.0 |
|
|
|
| full height |
| |
|
|
|
|
|
| ||
1 | N/A | 5 | 1 | Full length, | 3.3 volts | ||
|
|
|
|
| full height |
| |
|
|
|
|
|
|
| |
2 | x16 | x16 | 6 | 3 | Low Profile | 3.3 volts | |
2.0 |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
2 | N/A | 5 | 1 | Low Profile | 3.3 volts | ||
NOTE: All slots can accept universal keyed PCI cards
*Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
**Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus).
***
Storage Controller | HP Embedded SATA RAID Controller (integrated into the | ||
| Models | supporting SW RAID 0,1 |
|
|
| NOTE: Transfer rate: 1.5 Gb/s SATA | |
| Hot Plug SATA/SAS | HP SC40Ge HBA with RAID 0, 1 | |
| Models | NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA | |
|
| Hard Drives are required. |
|
|
| NOTE: Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS | |
| NOTE: A diskette drive, USB floppy drive key or virtual FDD using LO100 Advanced Pack is | ||
| needed to install storage controller drivers during a Windows operating system installation from a | ||
| CD. |
|
|
|
|
|
|
Storage | Optical Drives: |
|
|
| 8x IDE (ATAPI) | ||
| DVD/CD RW | 24x IDE (ATAPI) | |
| Diskette Drives | Via USB only |
|
| Drive Bays: |
|
|
| Up to 4 | ||
| Hot Plug SATA/SAS | Up to 4 Hot plug SAS/SATA 3.5" drives | |
|
|
|
|
Maximum Internal | 3.0TB | 4 x 750GB | |
Storage | Hot Plug SATA | 4.0TB | 4 x 1TB |
| Hot Plug SAS | 4.0TB | 4 x 1TB |
|
|
|
|
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 | Page 5 |