QuickSpecs
HP ProLiant DL160 Generation 5
Configuration Information - Factory Integrated Models
Memory | 1 GB FBD | |
| 2 GB FBD | |
| 4 GB FBD | |
| 8 GB FBD | |
| Dual Rank |
|
| 4 GB FBD | |
| 8 GB FBD | |
| 16 GB FBD | |
| 64 GB FBD | |
| Low Power |
|
| 2 GB FBD | |
| 4 GB FBD | |
| 8 GB FBD | |
|
|
|
Hard Drive | NOTE: Transfer rates of drives are dependent on the maximum transfer rate |
|
| supported by the HBA or Controller. Refer to the HBA or Controller technical |
|
| specifications for details. |
|
| SATA |
|
| NOTE: A minimum of one hard drive is required when purchasing |
|
| CTO Chassis Model (P/N |
|
| NOTE: SATA |
|
| Hot Plug CTO Chassis Models |
|
| HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD | |
| HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD | |
| HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD | |
| SATA |
|
| HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD | |
|
|
|
Storage Controllers | NOTE: A minimum of one SAS Controller is required when purchasing Hot Plug |
|
| CTO Chassis Model (P/N |
|
| NOTE: The below storage controllers are intended for use with internal drives |
|
| ONLY in the Hot Plug CTO Chassis Model (P/N |
|
| HP SC44Ge Host Bus Adapter | |
| NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard |
|
| Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS. |
|
| HP SC40Ge 4 Internal PCIe SAS RAID Half Height HBA, FIO | |
| NOTE: Recommended HBA when purchasing Hot Plug CTO Chassis Model |
|
| (P/N |
|
| NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard |
|
| Drives are required. Transfer rate 1.5 Gb/s SATA, 3 Gb/s SAS. |
|
| HP Smart Array E500/256MB Controller with Battery, FIO | |
| NOTE: Customers can only order one Smart Array E500/256MB Controller and |
|
| one |
|
| DL160 G5 server based on battery space. |
|
| HP Smart Array E200/128 BBWC Controller | |
| HP HBA |
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 | Page 17 |