HP ML370 Rack Airflow Rack 10000 G2 series Cabinets Requirements, Rack Kit, Telco Rack Support

QuickSpecs

HP ProLiant ML370 Generation 6

Standard Features

Rack Airflow	Rack 10000 G2 series Cabinets
Requirements	The increasing power of new high-performance processor technology requires increased cooling
	efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for
	maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
	CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
	adequate airflow and to prevent damage to the equipment:
	Front and rear doors: If your 42U server rack includes closing front and rear doors, you must
	allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to
	permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
	Side: The clearance between the installed rack component and the side panels of the rack
	must be a minimum of 2.75 inches (7 cm).
	CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.
	This arrangement ensures proper airflow. Using a rack without blanking panels results in improper
	cooling that can lead to thermal damage.
	NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation
	CD provided with the server, or to the server documentation located in the Support section at the
	following URL: www.hp.com/servers/ml370-g6.
Rack Kit	Quick deploy rail system provides tool-free support for racks with square or round mounting holes
	(including Compaq/HP 7000, 9000, 10000 G2 and HP series), with an adjustment range of 24" -
	36". The ambidextrous cable management arm can be mounted on either the left or right side for
	improved cable management.
Telco Rack Support	Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option
	kit from Rack Solutions at: www.hp.com/go/rackandpower.
Factory Express	HP Factory Express offers configuration, customization, integration and deployment services for
Portfolio for Servers	HP servers and storage products. Customers can choose how their factory solutions are built,
and Storage	tested, integrated, shipped and deployed.
	Factory Express offers service packages for simple configuration, racking, installation, complex
	configuration and design services as well as individual factory services, such as image loading,
	asset tagging, and custom packaging. HP products supported through Factory Express include a
	wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
	BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries
	and configurable network switches.
	For more information on Factory Express services for your specific server model please contact
	your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise	The HP eConfigure Enterprise Configurator now provides factory default racking for our HP
Configurator	hardware portfolio. This approach is aligned with our strategic direction to meet the needs and
	expectations of our valued customers. If you require "custom" rack configuration, please contact
	HP's Customer Business Center or an Authorized Partner for assistance.
	http://www.hp.com/products/configurator

DA - 13242 Worldwide QuickSpecs — Version 21 — 3-29-2010 Page 12