HP ML370 manual Relative Humidity, Altitude, Acoustic Noise, Idle, Operating, Emissions

QuickSpecs

HP ProLiant ML370 Generation 6

Technical Specifications

		is 10°C/hr (18°F/hr). The upper limit may be
		limited by the type and number of options
		installed.
		System performance may be reduced if
		operating with a fan fault or above 30°C
		(86°F).
	Non-operating	-30° to 60°C (-22° to 140°F). Maximum rate of
		change is 20°C/hr (36°F/hr).
Relative Humidity	Operating	10 to 90% relative humidity (Rh), 28°C
(non-condensing)		(82.4°F) maximum wet bulb temperature, non-
		condensing.
	Non-operating	10 to 95% relative humidity (Rh), 38.7°C
		(101.7°F) maximum wet bulb temperature,
		non-condensing.
Altitude	Operating	3048 m (10,000 ft). This value may be limited
		by the type and number of options installed.
		Maximum allowable altitude change rate is
		457 m/min (1500 ft/min).
	Non-operating	9144 m (30,000 ft). Maximum allowable
		altitude change rate is 457 m/min (1500
		ft/min).
Acoustic Noise	Listed are the declared A-Weighted sound power levels (LWAd) and
	declared average bystander position A-Weighted sound pressure levels
	(LpAm) when the product is operating in a 23°C ambient environment.
	Noise emissions were measured in accordance with ISO 7779 (ECMA
	74) and declared in accordance with ISO 9296 (ECMA 109).
	Idle
	L WAd	4.6 B for 1P Non-Redundant; 4.9 B for 2P
		Redundant
	L pAm	28 dB for 1P Non-Redundant; 31 dB for 2P
		Redundant
	Operating
	L WAd	4.7 B for 1P Non-Redundant; 5.0 B for 2P
		Redundant
	L pAm	29 dB for 1P Non-Redundant; 32 dB for 2P
		Redundant
	NOTE: The Listed sound levels apply to standard shipping
	configurations. Additional options may result in increased sound levels.
Emissions	FCC Rating	Class B
Classification (EMC)	Normative Standards	CISPR 22; EN55022; EN55024; FCC CFR 47,
		Pt 15; ICES-003; CNS13438; GB9254;
		K22;K24; EN 61000-3-2; EN 61000-3-3; EN
		60950-1; IEC 60950-1

NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.

DA - 13242 Worldwide QuickSpecs — Version 21 — 3-29-2010 Page 48