Installing the Memory Module | 1 |
This document provides instructions for upgrading the memory module on the library robotics controller. The memory module upgrade process consists of the following steps:
■Preparing the Library for the Upgrade
■Removing the Robotics Controller
■Removing and Replacing the Memory Module
■Completing the Procedure
To complete this upgrade you will need:
■Memory module
■Library firmware (on memory module)
■Tools
—5/32 inch Allen wrench
—#2 Phillips screwdriver
—#1 Phillips screwdriver
—Electrostatic Discharge (ESD) wrist strap connected by a ground cord to a grounded workstation or chassis
HP StorageWorks ESL9000 Series Tape Library Memory Module Upgrade Guide | 11 |