HP ESL9000 manual HP Technical Support, HP Storage Website, HP Authorized Reseller

Page 9

About this Guide

HP Technical Support

In North America, call technical support at 1-800-652-6672, available 24 hours a day, 7 days a week.

Note: For continuous quality improvement, calls may be recorded or monitored.

Outside North America, call technical support at the nearest location. Telephone

numbers for worldwide technical support are listed on the HP website under support: http://www.hp.com/support.

Be sure to have the following information available before calling:

Technical support registration number (if applicable)

Product serial numbers

Product model names and numbers

Applicable error messages

Operating system type and revision level

Name and revision of application software

HP Storage Website

The HP website has the latest information on this product, as well as the latest drivers. Access storage at: http://www.hp.com/products/tapestorage. From this

website, select the appropriate product or solution.

HP Authorized Reseller

For the name of your nearest HP authorized reseller:

In the United States, call 1-800-345-1518

In Canada, call 1-800-263-5868

Elsewhere, see the HP website for locations and telephone numbers: http://www.hp.com/support.

HP StorageWorks ESL9000 Series Tape Library Memory Module Upgrade Guide

9

Image 9
Contents Hp StorageWorks ESL9000 series tape library memory module Page Contents Tables About this Guide Text Symbols ConventionsDocument Conventions Equipment Symbols Getting Help Rack StabilityHP Technical Support HP Storage WebsiteHP Authorized Reseller About this Guide Installing the Memory Module Preparing the Library for the Upgrade Robotics controller and electronics bay cover Removing the Robotics ControllerRemoving the memory module Removing and Replacing the Memory ModuleTurning the Library On Completing the ProcedureInitializing Non-Volatile RAM Setting the Library for HP ModeChanging the Library Mode Changing the Library Settings Press Configure SDLT110 Setting the Number of Tape Drives Configure library screen Press Calibrate All Calibrating the LibraryInstalling the Memory Module