HP XP128, XP10000 manual Repeat for each logical volume on the disk array

Page 46

Example # newfs /dev/vg06/rlvol1

Example

Example

newfs: /etc/default/fs is used for determining the file system type

mkfs (hfs): Warning -272 sectors in the last cylinder are not allocated.

mkfs (hfs): /dev/vg06/rlvol1 - 2400256 sectors in 3847 cylinders of 16 tracks, 2547.9MB in 241 cyl groups (16 c/g, 10.22Mb/g, 1600 ig/g)

Super block backups (for fsck -b) at:

16, 10040, 20064, 30038, 40112, 50136, 60160, 70184, 80208, 90232, . . . 2396176

# newfs /dev/vg06/rlvol1Create file system

newfs: / etc/default/fs is used for determining the file system type

mkfs (hfs): ...

:

7188496, 7198520, 7208544

#

# newfs -F vxfs /dev/vg06/rlvol1Specify file system type

:

# newfs -F hfs /dev/vg06/rlvol2

2.Repeat step 1 for each logical volume on the disk array.

48

HP StorageWorks Disk Array XP Operating System Configuration Guide: HP-UX

Image 46
Contents XP128 XP1024 XP10000 XP12000 Sixth edition July Part number A5951-96015Sixth edition July 2005 part number A5951-96015 Contents Troubleshooting Prerequisites About this guideIntended audience Disk arraysHP sales and authorized resellers Related documentationHP storage website Contact HPHP technical support Document conventions BoldRevision history Warranty statement That USE of the Software is AT Your Sole RISK. HPAbout this guide Page Installation Features and requirements Fibre Channel interface Device emulation types FailoverSnmp configuration RAID Manager command devicesInstallation procedures Install and configure the disk array Setting the host mode for the disk array portsPage Setting the System Option Modes Mode Level Description and Usage SoftwareConfiguring the Fibre Channel ports Fibre AddressFabric and Connection parameter settings Installing and configuring the HBAs Install and configure the hostLoading the OS and software Clustering and fabric zoning SAN Connect the disk array Defining the pathsPage Verifying HBA installation ExampleVerifying device recognition To verify device recognitionCxtydz where Page Configure disk array devices Verifying the device files and drivers Claimed Busnexus Creating the device files # lsdev Character Block Driver Class 188 Sdisk Disk Example of a completed device data table Creating the physical volumes To create the physical volumesCreating new volume groups To create volume groups# mknod /dev/vg06/group c 64 Vgda Lvremove Creating logical volumesTo create logical volumes LvextendOPEN-L = Creating the file systems To create file systemsRepeat for each logical volume on the disk array Setting the I/O timeout parameter To change the I/O timeout parameterTo create a mount directory for each logical volume Creating the mount directoriesMounting and verifying the file systems To mount and verify the file systemsSetting and verifying the auto-mount parameters To set up and verify the auto-mount parametersParameter Name Enter Page Troubleshooting Error conditions With vgcreate Pvcreate for example, /dev/rdskNewfs for example, /dev/vg01/r/vo/x Host hangs or devices are Calling the HP support center Contact InformationPage Worksheets Path worksheet Disk array device emulations Supported emulations Device type specifications LusePage Disk array device emulations Luse device parameters MPEPhysical Max Extent Extent size Device type Size PE OPEN-8/9/E-CVS Scsi TID map for Fibre Channel adapters Value Reference information for SAM Configuring the devices using SAM Reference information for SAM Setting the maximum number of volume groups using SAM To change the maximum number of volume groupsCommand device Command ViewCommand View XP Array groupDisk cabinet unit Emulation modes Host modeDisk controller unit FailoverPort OPEN-xPath Remote console PCVolume Remote Control RCRemote Web Console Index Page Index