HP XP128 Creating the mount directories, To create a mount directory for each logical volume

--- Physical volumes ---
PV	Name	/dev/dsk/c0t6d0
VG	Name	/dev/vg06
PV	Status	available
:
Stale PE		0	[New I/O timeout value]
IO	Timeout (Seconds)	30

4. Repeat the above steps for each new disk that is connected to the system.

Creating the mount directories

Create a mount directory for each logical volume. Choose a unique name for each mount directory that identifies the logical volume.

Example The following example shows the root directory as the location for the mount directories.

To create a mount directory for each logical volume:

1.Use mkdir with the new mount directory name as the argument to create the mount directory.

#mkdir /AHPMD-LU00

2.Use the ls –xcommand to verify the new mount directory.

#ls -x

AHPMD-LU00	bin	dev	device	etc	export
floppy	home	hstsboof	kadb	kernel	lib

3. Repeat steps 1 and 2 for each logical volume on the disk array.

50 HP StorageWorks Disk Array XP Operating System Configuration Guide: HP-UX