HP XP128, XP10000 manual Remote Control RC, Remote Web Console, Volume

Page 78

Remote Control (RC)	HP StorageWorks Remote Control XP. A software product used for
	managing XP arrays.
Remote Web Console	HP StorageWorks XP Remote Web Console. A browser-based program
(RWC)	installed on the SVP that allows you to configure and manage the disk array.
R-SIM	Remote service information message.
SCSI	Small computer system interface.
SIM	Service information message.
SNMP	Simple Network Management Protocol.
SVP	Service processor, which is the PC built into the disk controller. The SVP
	provides a direct interface into the disk array. SVP use is reserved for HP
	support representatives only.
TB	Terabyte.
TID	Target ID.
Volume	On the XP array, a volume is a uniquely identified virtual storage device
	composed of a control unit (CU) component and a logical device (LDEV)
	component separated by a colon. For example 00:00 and 01:00 are two
	uniquely identified volumes; one is identified as CU = 00 and LDEV = 00,
	and the other as CU = 01 and LDEV = 00; they are two unique separate virtual
	storage devices within the XP array.
VSC	Volume size customization. Synonymous with CVS.
WWN	World Wide Name. A unique identifier assigned to a Fibre Channel device.

80	HP StorageWorks Disk Array XP Operating System Configuration Guide: HP-UX

Image 78

Contents XP128 XP1024 XP10000 XP12000 Sixth edition July Part number A5951-96015Sixth edition July 2005 part number A5951-96015 Contents Troubleshooting Prerequisites About this guideIntended audience Disk arraysHP sales and authorized resellers Related documentationHP storage website Contact HPHP technical support Document conventions BoldRevision history Warranty statement That USE of the Software is AT Your Sole RISK. HPAbout this guide Page Installation Features and requirements Fibre Channel interface Device emulation types FailoverSnmp configuration RAID Manager command devicesInstallation procedures Install and configure the disk array Setting the host mode for the disk array portsPage Setting the System Option Modes Mode Level Description and Usage SoftwareConfiguring the Fibre Channel ports Fibre AddressFabric and Connection parameter settings Install and configure the host Installing and configuring the HBAsLoading the OS and software Clustering and fabric zoning SAN Connect the disk array Defining the pathsPage Verifying HBA installation ExampleVerifying device recognition To verify device recognitionCxtydz where Page Configure disk array devices Verifying the device files and drivers Claimed Busnexus Creating the device files # lsdev Character Block Driver Class 188 Sdisk Disk Example of a completed device data table Creating the physical volumes To create the physical volumesCreating new volume groups To create volume groups# mknod /dev/vg06/group c 64 Vgda Lvremove Creating logical volumesTo create logical volumes LvextendOPEN-L = Creating the file systems To create file systemsRepeat for each logical volume on the disk array Setting the I/O timeout parameter To change the I/O timeout parameterTo create a mount directory for each logical volume Creating the mount directoriesMounting and verifying the file systems To mount and verify the file systemsSetting and verifying the auto-mount parameters To set up and verify the auto-mount parametersParameter Name Enter Page Troubleshooting Error conditions Pvcreate for example, /dev/rdsk With vgcreateNewfs for example, /dev/vg01/r/vo/x Host hangs or devices are Calling the HP support center Contact InformationPage Worksheets Path worksheet Disk array device emulations Supported emulations Device type specifications LusePage Disk array device emulations Luse device parameters MPEPhysical Max Extent Extent size Device type Size PE OPEN-8/9/E-CVS Scsi TID map for Fibre Channel adapters Value Reference information for SAM Configuring the devices using SAM Reference information for SAM Setting the maximum number of volume groups using SAM To change the maximum number of volume groupsCommand device Command ViewCommand View XP Array groupDisk cabinet unit Emulation modes Host modeDisk controller unit FailoverPort OPEN-xPath Remote console PCRemote Control RC VolumeRemote Web Console Index Page Index