HP 2 SP4 manual Connecting to the SMA, Accessing Storage Area Manager

Page 8

Storage Area Manager and SMA Implementation

Connecting to the SMA

After Storage Area Manager is installed on the SMA, you can connect to the SMA, either by using Terminal Services from a remote system, or by attaching a monitor, keyboard, and mouse directly to the SMA. This might be necessary when you need to access the Storage Area Manager management server; for example, to perform troubleshooting activities or to install required patches and device plug-ins (DPIs).

Terminal Services is a Microsoft communications program that is enabled on the Storage Management Appliance so that you can gain access to it. You should also install Microsoft

Terminal Services client on your workstation. See the Microsoft website, http://www.microsoft.com/windows2000/technologies/terminal, for more information on

installing and using the Terminal Services client.

Accessing Storage Area Manager

After Storage Area Manager is installed on the SMA, and clients and hosts are configured, you access and use Storage Area Manager in the usual way by connecting to the server from a client. In this way, you have access to all Storage Area Manager functionality. Although you cannot use the SMA software to start Storage Area Manager, the SMA interface provides access to some Storage Area Manager features, described below.

When Storage Area Manager is installed, an application icon and description appear on the SMA Tools page, as shown in Figure 1.

Figure 1: Storage Management Appliance Tools page

Clicking the Storage Area Manager icon connects you to the Storage Area Manager GUI downloads page. The GUI downloads page is a feature of Storage Area Manager that lets you download client and Manager of Managers software, as well as specify authentication information.

8

Using Storage Area Manager on the Storage Management Appliance Application Notes

Image 8
Contents Hp OpenView Copyright 2003 Hewlett-Packard Development Company, L.P Application Notes Contents About this DocumentIntended Audience Other Related DocumentationHttp//support.openview.hp.com HP OpenView Storage Management Appliance OverviewHP OpenView Storage Area Manager Network View and Storage Allocation Reporter Transition Storage Area Manager and SMA Implementation Hardware and Software RequirementsConnecting to the SMA Accessing Storage Area ManagerEvent Notification LicensingSecurity DatabasesDiscovery Performance ConsiderationsStorage Area Manager Installing and Uninstalling Storage Area Manager on the SMA Installation PrerequisitesPreparing for the Installation Storage Management Appliance Software HomeUninstalling Network View Uninstalling SANworks ApplicationsUninstalling SAR Upgrading the SMA II Hardware Double-clickAdd/Remove ProgramsInstalling Storage Area Manager Registering the Storage Area Manager Service with the SMA Storage Area Manager Service Registration with SMA SoftwareConfiguring a Fixed IP Address Uninstalling Storage Area Manager from the SMA SMA Configuration Guidelines Maximum ConfigurationPerforming Backup and Restore Operations Storage Area Manager BackupStorage Management Appliance Backup Configuring the SMA to Back Up Storage Area ManagerSave the osmbackup.conf file Backing Up the Storage Management Appliance So that it reads as followsRestoring the Storage Management Appliance Restoring Storage Area ManagerDual-redundant fabric configuration Using Modular Data Routers with the SMA