HP 2 SP4 Installing and Uninstalling Storage Area Manager on the SMA, Installation Prerequisites

Page 12

Installing and Uninstalling Storage Area Manager on the SMA

Installing and Uninstalling Storage Area Manager on the SMA

Note: Storage Area Manager must be installed and configured on customer systems by HP or other certified service professionals. This section is intended for that audience.

In general, Storage Area Manager installation on the SMA follows the procedures documented in the HP OpenView Storage Area Manager Installation Guide.

This section provides additional installation steps that are specific to the SMA, including the following:

■Installation Prerequisites, page 12

■Preparing for the Installation, page 13

■Uninstalling SANworks Applications, page 14

■Upgrading the SMA II Hardware, page 15

■Installing Storage Area Manager, page 16

■Registering the Storage Area Manager Service with the SMA, page 17

■Uninstalling Storage Area Manager from the SMA, page 19

Installation Prerequisites

Before proceeding with the steps in the remainder of this section, ensure that you have the following:

■Storage Management Appliance II or III

■Additional 1 GB of memory, only if using Storage Management Appliance II (HP part number: 201694-B21, includes two 512-MB DIMMs)

■Storage Management Appliance software v2.0 or v2.1, installed or on CD-ROM, ordered

from http://h18006.www1.hp.com/products/sanworks/softwaredrivers/managementappliance/index.html

■Storage Management Appliance software v2.0 Service Pack 4 (required only if using

software v2.0), downloaded from http://h18006.www1.hp.com/products/sanworks/softwaredrivers/managementappliance/index.html

■HP OpenView Storage Management Appliance Software User Guide, available from http://h18006.www1.hp.com/products/sanworks/managementappliance/documentation.html

■Storage Area Manager v3.0 or v3.1 CD-ROM and any required patches

■HP OpenView Storage Area Manager Installation Guide, available from http://h18006.www1.hp.com/products/storage/software/sam/index.html

■Monitor, keyboard, and optional mouse

■Optional Network View documentation, available from http://h18004.www1.hp.com/products/sanworks/networkview/documentation.html

■Optional Storage Area Manager device plug-ins and associated documentation, available from http://www.openview.hp.com/products/dpi/index.html

12

Using Storage Area Manager on the Storage Management Appliance Application Notes

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Hp OpenView Copyright 2003 Hewlett-Packard Development Company, L.P Application Notes Contents About this DocumentIntended Audience Other Related DocumentationHttp//support.openview.hp.com Overview HP OpenView Storage Area ManagerHP OpenView Storage Management Appliance Network View and Storage Allocation Reporter Transition Storage Area Manager and SMA Implementation Hardware and Software RequirementsConnecting to the SMA Accessing Storage Area ManagerEvent Notification LicensingSecurity DatabasesDiscovery Performance ConsiderationsStorage Area Manager Installing and Uninstalling Storage Area Manager on the SMA Installation PrerequisitesPreparing for the Installation Storage Management Appliance Software HomeUninstalling SANworks Applications Uninstalling SARUninstalling Network View Upgrading the SMA II Hardware Double-clickAdd/Remove ProgramsInstalling Storage Area Manager Registering the Storage Area Manager Service with the SMA Storage Area Manager Service Registration with SMA SoftwareConfiguring a Fixed IP Address Uninstalling Storage Area Manager from the SMA SMA Configuration Guidelines Maximum ConfigurationPerforming Backup and Restore Operations Storage Area Manager BackupStorage Management Appliance Backup Configuring the SMA to Back Up Storage Area ManagerSave the osmbackup.conf file Backing Up the Storage Management Appliance So that it reads as followsRestoring the Storage Management Appliance Restoring Storage Area ManagerDual-redundant fabric configuration Using Modular Data Routers with the SMA
Top Page Image Contents