![](/images/new-backgrounds/1259997/25999763x1.webp)
QuickSpecs
HP Compaq dx2300 Microtower Business PC
Technical Specifications - Environmental Data
Additional Information This product is in compliance with the Restrictions of Hazardous Substances (RoHS) directive – 2002/95/EC.
This product is in compliance with California Proposition 65 (State of California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This HP product is designed to comply with the Waste Electrical and Electronic Equipment (WEEE) Directive – 2002/96/EC.
This product is in compliance with the IEEE 1680 (EPEAT) standard at the Silver level, see http://www.epeat.net
Plastics parts weighing over 25 grams used in the product are marked per ISO 11469 and ISO1043.
This product contains 0% recycled materials (by wt.)
This product is >90% recyclable when properly disposed of at end of life.
| Packaging Materials |
| Corrugated Paper – TBD g |
| EPE Foam – TBD g |
| LDPE Bag |
| The EPE foam packaging material is made from |
| The corrugated paper packaging materials contains at least 80% recycled content. |
RoHS Compliance | |
| regulations, including the European Union Restriction of Hazardous Substances (RoHS) Directive. |
| HP's goal is to exceed compliance obligations by meeting the requirements of the RoHS Directive |
| on a worldwide basis. By July 1, 2006, RoHS substances will be virtually eliminated (virtually = to |
| levels below legal limits) for all HP electronic products subject to the RoHS Directive, except |
| where it is widely recognized that there is no technically feasible alternative (as indicated by an |
| exemption under the EU RoHS Directive). |
Material Usage | This product does not contain any of the following substances in excess of regulatory limits (refer |
| to the HP General Specification for the Environment at |
| http://www.hp.com/hpinfo/globalcitizenship/environment/supplychain/gen_specifications.html): |
| Asbestos |
| Certain Azo Colorants |
| Certain Brominated Flame Retardants – may not be used as flame retardants in plastics |
| Cadmium |
| Chlorinated Hydrocarbons |
| Chlorinated Paraffins |
| Formaldehyde |
| Halogenated Diphenyl Methanes |
| Lead carbonates and sulfates |
| Lead and Lead compounds |
| Mercuric Oxide Batteries |
| Nickel – finishes must not be used on the external surface designed to be frequently |
| handled or carried by the user. |
| Ozone Depleting Substances |
| Polybrominated Biphenyls (PBBs) |
| Polybrominated Biphenyl Ethers (PBBEs) |
| Polybrominated Biphenyl Oxides (PBBOs) |
| Polychlorinated Biphenyl (PCB) |
| Polychlorinated Terphenyls (PCT) |
| Polyvinyl Chloride (PVC) – except for wires and cables, and certain retail packaging has |
| been voluntarily removed from most applications. |
|
|
|
|
| DA - 12668 Worldwide — Version 9 — July 2, 2007 | Page 32 |