HP Music MC-1 manual Setting up the Music Center for Ethernet

Ethernet (continued)

Tip

Once the iPAQ Music Center is connected to the home network, it will no longer connect to the Internet using its dial-up modem. Make sure that there is a PC or other device on your home network which is acting as a communications gateway to the internet.

Tip

In most cases, the Primary and Secondary network connection method is the same (both set to homePNA or both set to ethernet). However, in custom situations, you could access both homePNA and ethernet networks.

Setting up the Music Center for Ethernet

1.Press the Setup button on the remote control. The System Setup screen is displayed.

2.Use the navigation arrows to highlight internet configuration, and press the Select button.

3.From the Setup - Internet Configuration screen select network connections, and press the Select button.

4.Under Primary Network Connection, use the navigation arrows to highlight ethernet, and press the Select button. This is the connection used by the Music Center for internet access (CD lookup, E-Commerce, etc).

5.Under Secondary Network Connection, use the navigation arrows to highlight ethernet, and press the Select button. The Music Center will use this connection for LAN access (connecting to the Media Manager program using a PC on the network).

6.Highlight save and press Select.

7.From the Setup - Internet Configuration screen highlight primary tcp/ip settings and press Select.

IPAQ MUSIC CENTER—ADDENDUM A HOME NETWORKING 3-7