4.On the Audio Input Selection screen, press the Select button repeatedly until your device appears. For a CD Changer, select the changer CD1 device for the analog or digital connection
you are using. If a connection is not used, select not used.
5.Highlight save and press Select.
6.Exit Setup
Power Cycle
The first time you connect your CD Changer, it is best to turn the CD Changer off and reset power to the Music Center.
To reset the power, press and hold the power button until the power LED starts flashing, then release it.
When the Music Center restarts, it will recognize the CD Changer.
Finding your Changer
Once you have set up your A/V connections for a CD Changer, a group will appear in your guide called External. This lists all of the external devices you have attached to your Music Center, and your changer should appear on that list.
All your changer CDs will appear in the CDs group.
IPAQ MUSIC | USING A CD CHANGER |