Troubleshooting
Troubleshooting (Continued)
Problem | Solutions | ||
|
|
| |
Only the Compaq startup screen | 1. | Check that the cables are connected | |
displays. |
| securely. | |
| 2. | Verify that the proper input source is | |
|
| connected. | |
| 3. | Make sure your notebook | |
|
| computer’s external video port is | |
|
| activated. | |
|
|
| |
A blue screen displays on the | 1. | Check the Play or TV/Video buttons | |
projection screen when a |
| on the video source. | |
videocassette recorder, DVD | 2. | If that does not work, refer to the | |
player, or other video source is | |||
| owner’s manual that came with the | ||
connected to the projector. |
| ||
| video source. | ||
|
| ||
|
| ||
Screen is dimmer than normal. | The projector is in lamp saver mode. | ||
| Press the lamp saver button on the top of | ||
| the projector to turn lamp saver on or off. | ||
| If the LED is green, lamp saver is on. If | ||
| the LED is not lit, lamp saver is off. | ||
|
|
| |
Lamp shuts off. | 1. | If the Standby LED flashes green | |
|
| rapidly, the projector has overheated | |
|
| and will automatically shut down. | |
|
| Wait five to ten minutes until the LED | |
|
| stops flashing and the | |
|
| Power/Standby button turns amber | |
|
| before restarting the projector again. | |
| 2. | A minor power surge may cause the | |
|
| lamp to shut off. Wait a few minutes, | |
|
| then turn it back on. | |
| 3. | When the lamp has reached the end | |
|
| of its life, the system will | |
|
| automatically turn off to prevent | |
possible lamp rupture. Replace the lamp as described in the “Replacing the Projector Lamp Module” section of Chapter 7.
Compaq iPAQ Microportable Projector MP3800 User’s Guide |