HP MP3800 manual Minus button

Getting Started

Identifying the Projector Buttons (Continued)

Item	Symbol	Control	Function
2		Menu button	1.	Press this button once to start the
				on-screen display menu.
			2.	Press it again to select an item on
				the menu.
			3.	If pressed after selecting “yes” or
				“no” to a question, the request will
				be processed and the menu will go
				one level higher.
			4.	If pressed after changing an
				adjustment scale, the new
				information will be saved and the
				menu will go one level higher.
3		Plus button	Selects and adjusts the on-screen
			scroll-up menu functions.
4		Minus button	Selects and adjusts the on-screen
			scroll-down menu functions.
5		Resync button	Automatically synchronizes the
			projector to track the input source.

To use standby mode, press the Power/Standby button and, after a six to ten second delay, the unit enters Standby mode and the projector lamp turns off. A “Going to Standby” message appears on the screen for the duration of the six to ten second delay. When the message disappears from the screen, there is a 45 second delay before the lamp can be turned back on. Wait 45 seconds to allow the lamp to cool before pressing the Power/Standby button again. To avoid going to Standby, press the Power/Standby button again within the first five seconds.

1–6 Compaq iPAQ Microportable Projector MP3800 User’s Guide