Troubleshooting
Troubleshooting (Continued)
Problem | Solutions |
|
|
Remote control does not operate. | 1. Ensure the remote control is pointed |
| at the sensor and is within 21.0 feet |
| (6.4 meters) of the projector. |
| 2. The battery may need to be |
| replaced. |
| 3. Verify that the battery is installed |
| properly. |
|
|
Compatibility issues with | Contact your Compaq authorized service |
equipment attached to the | provider or call Compaq Customer |
projector. | Support for help. Refer to the Worldwide |
| Telephone Numbers booklet included in |
| the projector documentation kit for a |
| complete list of customer support |
| numbers to call. |
Image size is too small or too large.
1.Adjust the digital zoom or move the camera until the image is the desired size.
2.The projector may be set to display in the center of the display area without any expansion. To change the setting, access the
Compaq iPAQ Microportable Projector MP3800 User’s Guide |