2
Using the Projector
Setting Up the Projector
Follow the instructions below and on the following pages to set up the projector. Separate setup instructions are described for the following products:
■Notebook computers
■Desktop computers
■Compaq iPAQ Pocket PC with VGA capability
The projector is hot pluggable and can be connected to any input source while the source is in use.
Place the projector on a stable desk, table, tripod, or ceiling mount at a distance not less than 3.7 feet (1.1 meters) and not greater than 32.8 feet (10.0 meters) from the projection screen.
ÅWARNING: To reduce the risk of electric shock or damage to your equipment:
■Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
■Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
■Disconnect power from the projector by unplugging the power cord from the electrical outlet.
■Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug.
Compaq iPAQ Microportable Projector MP3800 User’s Guide |