HP 8000 s manual Toner OUT

Printer unit control panel messages (continued)

Control panel message	Recommended action
TONER OUT	Printing cannot continue until the specified
REPLACE <COLOR>	toner cartridge has been replaced.
TOP	Remove all media from the top output bin.
OUTPUT BIN FULL
TRANSFER KIT LOW	Although printing can continue, the transfer kit
REPLACE KIT	should be replaced for optimum printer unit
	operation.
TRANSFER KIT OUT	Replace the transfer kit and reset the transfer
REPLACE KIT	counter before attempting to print.
TRAY 1 CONTAINS	Configure the media type for Tray 1 or remove
UNKNOWN MEDIA	the remaining media.
TRAY 1 LOAD	Load the media type and size specified on the
<TYPE> <SIZE>	display.
TRAY X EMPTY	Load the media type and size specified on the
<TYPE> <SIZE>	display.
TRAY X LOAD	Load the media specified on the display, and
<TYPE> <SIZE>	configure the input tray in the printer unit
CHECK CONTROL	control panel.
	Pressing GO will cause the printer unit to
PANEL SETTING
	attempt to print the page on the default size
	media.

Note

For more information on the control panel messages and their recommended actions, see the HP Color LaserJet 8550, 8550N, 8550DN, 8550GN, 8550MFP Printer User Guide on CD-ROM.

30 Common messages EN