TYPICAL FIELD WIRING - 1 PH APPLICATION (018S78 - 036S78)
ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES
POWER WIRING
CONTACTOR
TERMINALS
GND.
24 VOLT CONTROL WIRING MINIMUM 18 GA. WIRE (NEC CLASS 2)
*TERMINAL W IS ONLY REQUIRED ON SYSTEMS WITH HEAT.
POWER WIRING
CONTROL WIRING
FACTORY WIRING
FURNACE OR AIR HANDLER TERMINAL BLOCK
C Y R G W
LUG
COIL
Y R G W *
CONDENSING UNIT | ROOM THERMOSTAT |
|
ALL OUTDOOR WIRING MUST BE WEATHERPROOF. USE COPPER CONDUCTORS ONLY.
TYPICAL FIELD WIRING - 3 PH APPLICATION (036S50 - 060S50)
ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES
POWER WIRING
CONTACTOR
TERMINALS
GND.
LUG
COIL
24 VOLT CONTROL WIRING MINIMUM 18 GA. WIRE (NEC CLASS 2)
*TERMINAL W IS ONLY REQUIRED ON SYSTEMS WITH HEAT.
POWER WIRING
CONTROL WIRING
FACTORY WIRING
FURNACE OR AIR HANDLER TERMINAL BLOCK
C Y R G W
Y R G W *
CONDENSING UNIT | ROOM THERMOSTAT |
|
ALL OUTDOOR WIRING MUST BE WEATHERPROOF. USE COPPER CONDUCTORS ONLY.
6 | Unitary Products Group |