2.5 Powering the Camcorder On / Off
2.5.1 Auto Power On/Off
Once the vehicle engine is started, the camcorder automatically turns on. If the Automatic Record function is enabled, the recording will automatically start right after the camcorder powers on.
Please refer to Set Automatic Record (2.6.1).
2.5.2 Manual Power On/Off and Reset
2.5.2.1Manual Power On
Slide the power switch and make sure that the power switch locks on the memory card slot.
On
2.5.2.2Power Off
The power switch to the edge and make sure that the memory slot is released and the camcorder starts power off sequence. Do not power on the camcorder when it is in the
Off
2.5.2.3Reset the Camcorder
In case the camcorder fails to function normally due to unknown causes, slide the power switch and verify the memory card is in the removable state; wait for 7 seconds and slide the power switch again to restart the camcorder.
14