4.Touch 
/
to select 
for entering LDWS function menu,
then touch | again to enable the function (on). |
5.Touch 
to return to record screen.
6.After enabling LDWS, screen displays LDWS cross line
, please adjust the equipment to align the skyline with the horizontal line, and make sure the vertical line in the middle of road.
Vanishing Point
Eye Level | Horizon |
7.When satellite positioning is in ready state, device will give a voice alert and an alarm screen if vehicle speed reaches or exceeds 50 km/h (31 mile/h) and the vehicle deviates from the original lane.
Note:
1.LDWS is only applicable when satellite positioning is in ready state. Make sure satellite positioning of your device is ready if you want to activate this function. Satellite positioning function is dependent on the model purchased.
2.When enable the LDWS, please follow this
3.The all Driving Safety functions such as LDWS, Speed Cam Alert, Speed Limit Alert, Driver Fatigue Alert and Collision Detection will be disabled, if the product doesn’t connect with the external power supply.
19