JVC HR-S9500EK setup guide Insert Editing, SET Input Mode, Locate END Point, Reset the Counter

38ADVANCEDOPERATIONS (cont.)

Insert Editing

Recorder Your recorder

Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio track as well, use the audio dubbing function simultaneously. Use your video recorder as the recorder.

Source tape

TV
PROG	PAUSE
S-Video signal	Audio/Video signal

Another recorder

Player

NUMBER	4	5	6
	1	2	3
			2
"0"	7	8	9
		0	4

0000

TV PROG

1

PAUSE

3

JOG/SHUTTLE

	Before insert editing	Normal audio
Recorded tape		track
	After insert editing
		Video/Hi-Fi
		audio track

MAKE CONNECTIONS

1 Connect the player's VIDEO OUT or S-VIDEO OUT and AUDIO OUT connectors to your recorder's VIDEO or S-VIDEO and AUDIO input connectors on the front panel.

2	SET INPUT MODE
	Press NUMBER key "0" and/or TV PROG so that "F-1"
	for the VIDEO/AUDIO input connectors or "S-1" for
	S-VIDEO/AUDIO input connectors appears in place of
	a channel number.

	LOCATE END POINT
	Load the recording cassette into your recorder, and play
	it back to determine the edit-out point (the end of the
3 segment to be replaced) using the SHUTTLE ring or the
	JOG dial or pressingÞ%and PAUSE.
	● To use the JOG dial/SHUTTLE ring, first press the
	JOG/SHUTTLE button on the remote control so that
	the button lights up.
	RESET THE COUNTER
4 Press 0000 to change the counter display to "0:00:00".
5	LOCATE START POINT
	Determine the edit-in point (the beginning of the
	segment to be replaced) using the SHUTTLE ring or the
	JOG dial or pressingÞ%and PAUSE.
	● Be sure to engage the Still mode at the edit-in point.

JOG

SHUTTLE