JVC HR-S9500EK Playback Picture Adjustment, Manual Tracking, Digital TBC/NR, Digital 3R

22ADVANCEDOPERATIONS (cont.)

Playback

Picture

Adjustment

TV PROG

DIGITAL

TBC/NR

TV PROG

1

3	OK
MENU

Manual Tracking

Your video recorder is equipped with automatic tracking control. For most tapes this will automatically adjust the tracking to suit the particular tape you are playing. In some circumstances it may be necessary to make manual tracking adjustments. This is usually only associated with old or worn tapes or recordings made on old or worn recorders. If the automatic tracking control fails to operate correctly you will see noise bars across the picture as shown on the left below. To correct this you can override the automatic control and adjust the

tracking manually by pressing the TV PROG buttons.

1	OVERRIDE AUTOMATIC TRACKING
	Press	on the remote to engage manual tracking.
2	ADJUST TRACKING MANUALLY
	Press TV PROG + or – to adjust tracking.
3	RETURN TO AUTOMATIC TRACKING
	Press	on the remote to re-engage automatic
	tracking.

NOTE:

Digital TBC/NR

Your video recorder is equipped with the Digital TBC (Time Base Corrector) that removes jitter from fluctuating video signals to deliver a stable picture even with old tapes and rental cassettes. The on/off of Digital 3-DNR (Noise Reduction) which cuts noise and enables clear picture reproduction is also linked to this function.

* The default setting is "ON".

We recommend that you use the Digital TBC feature when...

... playing back a tape recorded on a camcorder.

... playing back a tape repeatedly used.

... using this video recorder as the player for editing.

1	ACTIVATE DIGITAL TBC/NR
	Press DIGITAL TBC/NR so that the button lights up.
	● To turn off DIGITAL TBC/NR, press DIGITAL TBC/NR
	again so that the light goes off.

NOTES:

●If you play back a tape recorded under poor TV reception condition, there may be cases where the picture becomes more stable with Digital TBC/NR set to off.

●When Digital TBC/NR is set to on, if you play back a tape where certain types of signals are recorded (using a PC or some character generators), the playback picture may be distorted. If this is the case, turn off Digital TBC/NR.

Digital 3R

Digital 3R picture system applies edge correction to the luminance signal to enhance detail.

ACCESS MAIN MENU SCREEN

1 Press MENU.
2	ACCESS MODE SET SCREEN
	Move the highlight bar	MAIN MENU
	(arrow) to "MODE SET" by
	pressing %Þ, then press	MODE SET
	OK or%.	AUTO CH SET
		MANUAL CH SET
		INITIAL SET
		REC LEVEL CTL
		R.A. EDITT
		[5°] =
		[MENU] : EXIT
	SELECT DIGITAL 3R SET MODE
	Move the highlight bar	MODE SET
	(arrow) to "DIGITAL 3R"
	by pressing %Þ, then	AUTO TIMER	OFF
3 press OK or%to set to		O. S. D.	ON
	"ON".	B. E. S. T.	ON
		AUTO SP=LP TIMER	OFF
		DIGITAL 3R	ON
		S-VHS	AUTO
		EDIT	OFF
		NEXT PAGE
		[5°] =
		[MENU] : EXIT
	RETURN TO NORMAL SCREEN
4 Press MENU.

NOTES:

● Normally it is recommendable to keep "DIGITAL 3R" set to "ON". ● Depending on the type of tape being used, picture quality

may be better with "DIGITAL 3R" set to "OFF".

When a new tape is inserted, the recorder returns to the automatic tracking mode automatically.