JVC HR-S9500EK Looking For Scene You Want, Skip Over Unwanted, Sections, Activate Index Search

Looking For

The Scene

You Want

REVIEW

1 2 3

2

4 5 6

7 8 9

0 4

30 SEC

1

Skip Search

	SKIP OVER UNWANTED
1	SECTIONS
	Press 30 SEC 1 to 4 times during playback. Each press
	initiates a 30-second period of fast-motion playback.
	Normal playback resumes automatically.

NOTE:

To return to normal playback during a Skip Search, press PLAY.

23

Index Search
Your recorder automatically marks	£ 2
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

ACTIVATE INDEX SEARCH

	PressÞor%(ª or £). “ª 1” or “£ 1” is
	displayed on screen and search begins in the corre-
1 sponding direction.
	● To access index codes 2 through 9, pressÞor %
	repeatedly until the correct index number is dis-
	played.
	Ex.: To locate the beginning of B from the current
	position, pressÞtwice.
	To locate the beginning of D from the current
	position, press%once.
		Current position
		A	B		C	D	E	F
		–2		–1		1	2	3
				￿				Index	number

●When the specified index code is located, playback begins automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

●The front display panel tells you how many programmes have been timer-recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTES:

●Instant ReView is not possible while the recorder is in the Timer mode.

●The number of recorded programmes will not be displayed on the front display panel after Auto Satellite Prog recording (☞ pg. 28).