JVC HR-S9500EK SET Remote Control Code, RE-SUPPLY Power, SET Satellite Receiver Brand Code

VCR/TV/SAT

NUMBER "1"		1	2	3
					2	NUMBER
		4	5	6
		"2"	8	9
	NUMBER	7
			0		4

1

STOP

TV PROG+/–

3

A/B

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’s A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

REMOVE POWER SUPPLY

1 Unplug the mains power cord from the mains outlet.

SET REMOTE CONTROL

CODE

2 While holding down A/B on the remote control, press the NUMBER key "2" and then press STOP.

RE-SUPPLY POWER

3 Plug the mains power cord back into the mains outlet.

TURN THE RECORDER ON

4 Press on the remote control. The recorder will now only respond to B code signals.

NOTE:

To set the recorder back to respond to A code signals, repeat the same procedure as shown above except pressing NUMBER key "1" instead of "2" in step 2.

31

Satellite Receiver Multi-

Brand Remote Control

Your remote control can operate the basic functions of your satellite receiver set. In addition to JVC satellite receivers, other manufacturer’s satellite receivers can also be controlled.

Before you start . . .

●Turn on the satellite receiver using its remote control.

●Set the remote control’s VCR/TV/SAT switch to SAT.

SET SATELLITE RECEIVER

BRAND CODE

Refer to the chart below. While holding down	on the
recorder's remote control, enter your satellite receiver’s
1 brand code using the NUMBER keys, then press STOP.
Check if the satellite receiver's power goes off as it
should. If it does, try other operations (☞ step 2).

●Once you have set the remote control to operate the satellite receiver, you don't have to repeat this step until you replace your remote control's battteries.

●Some satellite receiver brands have more than one code. If the satellite receiver does not function with one code, try entering another.

OPERATE SATELLITE

RECEIVER

2	Press the corresponding button: , TV PROG +/–,
	NUMBER keys.

●For VIDEOWAY or some brands of satellite receiver, you

must press after having pressed the NUMBER keys.

●The NUMBER buttons may not function with some satellite receivers.

●To return the remote to video recorder control, set the VCR/TV/SAT switch to VCR.

IMPORTANT

Although the provided remote control unit is compatible with JVC satellite receivers, as well as many other models, it may not work with your satellite receiver, or in some instances, may have limited function capability.

SATELLITE RECEIVER BRAND	CODE
JVC	72, 73
AMSTRAD	60, 61, 62, 63
BT	72
CANAL +	81
FINLUX	68
GRUNDIG	64, 65
HIRSCHMANN	64
ITT	68
JERROLD	75
KATHREIN	70, 71
LUXOR	68
MASPRO	70
NOKIA	68
PACE	65, 67
PANASONIC	74
PHILIPS	66
RFT	69
SALORA	68
SIEMENS	64
SKYMASTER	69
VIDEOWAY	76
WISI	64