HP c8000 manual Sample XF86Config file

configuring X Windows on HP-UX (other graphics cards)

sample XF86Config file

Option	"Protocol" "PS/2"
EndSection

#

#There may be multiple Monitor sections. The purpose of this section is

#is to specify the range of operation of a monitor. For a Monitor to be

#in use the Identifier must match the Monitor line in an active Screen.

#HorizSync and VertRefresh are required fields. See the GAG for more

#options that may be set.

#

Section "Monitor" Identifier "Monitor 0"

HorizSync 30.0 - 110.0 VertRefresh 50.0 - 75.0

#DPMS is not enabled by default. Uncomment the following line to

#enable it.

#Option	"DPMS" "on"
EndSection

#

#There may be multiple Device sections. This section is used to specify

#parameters for the graphics device. The Identifier string must match

#the Device string in the active Screen section for this device to be

#in use. See GAG for more options that may be set for this particular device.

Section "Device"

Identifier "Console"

Devicefile "/dev/gvid" EndSection

#

#There may be multiple Screen sections. The Identifier string must match

#the Device string in the active ServerLayout section for the Screen to

#be active.

#

Section "Screen"

Identifier	"Screen 0"
Device	"Console"
Monitor	"Monitor 0"

#

#Set the default depth.

DefaultDepth 24

#

#The subsection associates a buffer depth with a screen size.

SubSection "Display"

Depth 24

Modes "1280x1024" EndSubSection EndSection

54 Chapter 3