York 69-1659 UV100A manual Replacing Your Lamps Unit Description Replacement Lamps

Page 7

UV100A ULTRAVIOLET AIR TREATMENT SYSTEM

6.Continue lightly pushing in on the lamp while rotating it slowly counterclockwise. This should cause the lamp to drop into the bottom of the lamp well.

7.Rotate the lamp clockwise until it snaps into place with the lamp light indicator aligned with the raised button on the unit cover.

WARNING

UV Light Hazard.

Harmful to bare skin and eyes.

Can cause temporary or permanent loss of vision.

Never look at the lamps while illuminated.

Only view illumination by way of the light indicator located on the lamp knob. To prevent exposure to ultraviolet light, disconnect power to the ultraviolet air treatment system before servicing any part of the heating/air conditioning system.

8.Plug your ultraviolet air treatment system cord into the nearby 120 Vac electrical outlet.

9.Verify that your ultraviolet lamp(s) are operating only by viewing through the lamp light indicator on the lamp knob. Never look directly at your lamp(s) while illuminated.

10.Reconnect the power to your HVAC system.

Table 1. Replacing Your Lamp(s).

Unit Description

Replacement Lamps

Wattage

UV100A1085 Coil Irradiation Unit

UC100A1054

36W

7

69-1659

Image 7
Contents UV100A Ultraviolet Air Treatment System HOW Your Ultraviolet AIR Treatment System Works 69-1659 HOW YOU can Maintain Your Ultraviolet AIR Treatment System Cleaning Your Lamps Every Three Months QuarterlyUV Lamp Cleaning Reminder Schedule Replacing Your Lamps Annually Replacing Your Lamps Unit Description Replacement Lamps Automation and Control Solutions Limited Warranty