![](/images/new-backgrounds/1152251/152251125x1.webp)
Removal and replacement procedures
3.Turn the computer
4.Open the computer as far as possible.
5.Lift the rear edge 1 and then the left edge 2 of the keyboard until it rests at an angle.
6.Slide the keyboard 3 back until it rests on the display.
7.Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached, and then disconnect the keyboard cable 2 from the system board.
8. Remove the keyboard.
Reverse this procedure to install the keyboard.
Maintenance and Service Guide |