![](/images/new-backgrounds/1152251/152251141x1.webp)
Removal and replacement procedures
Display assembly
DescriptionSpare part number
Display assembly with 2 WWAN antennas for use with the HP Mini | |
Display assembly for use with the HP Mini | |
Display assembly with 2 WWAN antennas for use with the Compaq Mini | |
Display assembly with 2 WWAN antenna for use with the | |
Display assembly with 2 WWAN antenna for use with the | |
|
|
Display bezel (includes hinge covers): |
|
For use only with the HP Mini | |
For use only with the Compaq Mini | |
For use only with the HP Pavilion | |
|
|
Display panel | |
|
|
Display panel/webcam/microphone cable | |
|
|
Webcam module | |
|
|
Wireless antenna cables | |
|
|
Display enclosure (includes hinge and hinge brackets): |
|
For use with the HP Mini and HP Pavilion | |
For use with the HP Mini and HP Pavilion that includes WWAN | |
For use with the Compaq Mini | |
|
|
Before removing the display assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see “Battery” on page
5.Remove the accessory compartment cover (see “WLAN module” on page
6.Remove the hard drive (see “Hard drive” on page
7.Disconnect the wireless antenna cables from the WLAN module (see “WLAN module” on page
8.Remove the keyboard (see “Keyboard” on page
9.Remove the top cover (see “Top cover” on page
Maintenance and Service Guide |