HP ap5000 Base Model Point of Sale System manual Always On, Stand Mode, Trigger Object Sense

Page 11

Figure 2-5Flashing Mode

Always On

No trigger pull is required to read a barcode. Scanning is continually on. If the trigger is pulled, the reader acts as if it is in Trigger Single Mode. Double Read Timeout prevents undesired multiple reads while in this mode.

NOTE: Double Read Timeout is programmed using the PG.

Figure 2-6 Always On

Stand Mode

No trigger pull is required to read a barcode. Scanning is turned on automatically when an item is placed in reader’s field of view. If the trigger is pulled, the reader acts as if it in Trigger Single mode. Double Read Timeout prevents undesired multiple reads while in this mode.

NOTE: Double Read Timeout is programmed using the PG.

Figure 2-7 Stand Mode

Trigger Object Sense

This mode is similar to Stand Mode, except that a trigger pull is required to activate the decoder.

Figure 2-8Trigger Object Sense

ENWW	Scanning Modes 5

Image 11

Contents HP Linear Scanner First Edition October Document Part Number About This Guide Iv About This Guide Table of contents Chemical Substances Restriction of Hazardous Substances RoHS Setting Up the Scanner Enww Scanning Modes Using the ScannerTrigger Single Mode Parts of the ScannerFlashing Mode Trigger Hold Multiple ModeTrigger Pulse Multiple Mode Trigger Object Sense Stand ModeAlways On USB Interface Resetting the Product Configuration to DefaultsProgramming Barcodes LED LED and Beeper IndicationsSolving Common Problems TroubleshootingPreparing to Call Technical Support Cables Agency Regulatory NoticesFederal Communications Commission Notice ModificationsEuropean Union Regulatory Notice Canadian NoticeAvis Canadien Materials Disposal Japanese Notice Korean Notice Product Environmental NoticesProduct Environmental Notices SJ/T11363-2006