Programming Barcodes
For your convenience, this guide includes the programming barcodes required to configure the scanner for use with different interface (terminal/host) types.
Refer to the Programming Guide (PG) at http://www.hp.com/support for more complete information about programming and configurable features.
Resetting the Product Configuration to Defaults
If you aren't sure what programming options are in your scanner, or you've changed some options and want to restore the Custom Default Configuration that may have been saved in the scanner, scan the Restore Custom Default Configuration barcode below. This will restore the custom configuration for the currently active interface.
Figure 2-9 Restore Custom Default Configuration
USB Interface
The scanner attaches directly to a USB host, or a powered USB hub, and is powered by it. No additional power supply is required. When using a USB interface, the scanner
Figure 2-10 Select USB-COM-STD
Figure 2-11 Select USB Keyboard (with standard key encoding)
Figure 2-12 Select USB Alternate Keyboard (with alternate key encoding)
6 Chapter 2 Using the Scanner | ENWW |