HP 40 SCSI manual Interface DAT SCSI-2 Interface, SCSI-3 Interface, Scsi Connector, USB Interface

QuickSpecs

HP StorageWorks DAT Drives

Technical Specifications

Interface	DAT 24	DAT 40	DAT 72
SCSI-2 Interface	Narrow SCSI-2 single-	Wide Ultra SCSI	Wide Ultra SCSI
	ended	(LVD/SE)	(LVD/SE)
SCSI-3 Interface	N/A	N/A	SCSI-3 Ultra 160 LVD
SCSI Connector	Internal: 50-pin LVDS	Internal: 68-pin wide HD Internal: 68-pin wide HD
	External: 50-pin narrow	LVD	LVD
	HD LVDS, bail lock	External: 68-pin wide	External: 68-pin wide
		HDLVD, thumbscrew	LVDS, thumbscrew
	Array module: 80-pin	Hot-plug: 80-pin SCA-2	Hot-plug: 80-pin SCA-2
	EBBI	(SCSI and power)	(SCSI and power)
		Array module: 80-pin	Array module: 80-pin
		EBBI	EBBI
USB Interface	USB 2.0	USB 2.0	USB 2.0
USB Connector	USB standard series B	USB standard series B	USB standard series B
	receptacle	receptacle	receptacle

Termination - is only required for the SCSI product

No terminator is required for internal model (assumes use of terminated cable).

External model requires termination with multimode terminator (included with product).

SCSI Array module requires termination with multimode terminator (ordered separately - p/n C2364A).

Power Specifications		DAT 24	DAT 40	DAT 72
	Power Requirements	+5V ± 5% (100mV Max	+5V ± 5% (100mV Max +5V ± 5% (100mV Max
	(SCSI-2 internal, hot-	ripple) @1.2A	ripple) @0.6A	ripple) @0.6A
	plug, and array module)	+12V ± 10% (150mV	+12V ± 10% (150mV	+12V ± 10% (150mV
		Max ripple) @0.1A	Max ripple) @1.2A	Max ripple) @1.2A
	Power Requirements	+5V ± 5% (100mV Max	+5V ± 5% (100mV Max +5V ± 5% (100mV Max
	(USB and SCSI-3	ripple) @0.8A	ripple) @0.8A	ripple) @0.8A
	internal, and array	+12V ± 10% (150mV	+12V ± 10% (150mV	+12V ± 10% (150mV
	module)	Max ripple) @0.3A	Max ripple) @0.3A	Max ripple) @0.3A
	Power Requirements	100 to 240 VAC, 50-60	100 to 240 VAC, 50-60	100 to 240 VAC, 50-60
	(external)	Hz, auto-ranging	Hz, auto-ranging	Hz, auto-ranging
	Power consumption	6 Watts	7.3 Watts	7.1 Watts
	(SCSI) (average)
	Power consumption	7.1 Watts	7.3 Watts	7.1 Watts
	(USB) (average)
Environmental	Relative Humidity	Storage	5% to 95%
Specifications		Operating	20% to 80%
(all models)
	Temperature Range	Storage	-40° to 158° F/(-40° to 70° C)
		Operating	41° to 104° F/(5° to 40° C)

Standards Compliance cCSAus Certification to C22.2, No. 60950, TÜV EN60950 (IEC 60950), FCC and CE Declaration of Conformity, C-TICK Approved (AS/NZS CISPR22), VCCI Approved, RRL Approved, BSMI Approved, GOSH Approved

DA - 11883 Worldwide — Version 15 — March 20, 2006 Page 27