how to use the scanner
change settings
You can customize some features of the HP Scanjet scanner, including the front panel button settings, previewing of images, and other preferences. If you have an HP Scanjet 3970 scanner, you can choose whether scanning takes place immediately or waits for the
change settings from the hp director
When you use the scanner buttons or the HP Director, the scanner uses settings optimized for the scanned original type, such as a photograph. The Settings menu in the HP Director provides a means of changing all scanning settings. It includes button settings, scanning preferences, and other settings that you can change. To change settings start the HP Director, and click Settings.
turn preview image on or off
You can change whether a preview image appears or does not appear. For more information, see the HP Photo & Imaging software help.
enable instant scanning
If you have an HP Scanjet 3970 scanner, use the instant scanning feature to set the scanner to begin scanning immediately, without waiting for the lamp to warm up.
1Open the HP Director, click Settings, and click Scan Preferences.
2Click the Quality vs. Speed tab.
–To eliminate the lamp
–To reduce power consumption, clear the Instant Lamp
select picture or document
When the software prompts you for an original type, you have two choices: Picture or Document. The scanner optimizes settings based on your choice. Use the following guidelines to determine the best original type for your needs.
If your original consists of | Select this original type |
|
|
A printed photograph, graphic, slide, or negatives, | Picture |
or objects, such as framed photos, artwork, or fabric |
|
Note: Avoid placing items with sharp edges in |
|
the scanner. Doing so can damage the scanner. |
|
Before placing an item on the scanner glass, |
|
make sure the item is free of wet glue, correction |
|
fluid, or other substances that can be |
|
transferred to the glass. |
|
|
|
Text, both text and graphics, or any text that you | Document |
want to edit later |
|
|
|
To change the original types, see change settings on page 8.
user’s manual | 8 |