HP ThinState Capture
The HP ThinState Capture tool is a
NOTE: HP ThinState Capture is not a standalone utility and can only be accessed by the administrator from within the computer image.
Save all data on the USB flash drive prior to performing this procedure.
1.Select Start > Control Panel > HP ThinState Capture.
2.Click Next.
Attach a
The DOK must be greater in size than the onboard flash drive. Therefore, if your computer has a
3.Click Capture.
4.Click Yes. The HP ThinState Capture utility formats and makes the USB flash drive bootable. HP ThinState Capture will now reboot the system.
5.Follow the
You can now use the USB flash drive to deploy the captured image to another HP computer of the exact same model and hardware with equal or greater flash drive capacity.
24 Chapter 4 Applications